Cisco 3800 Series Configuring - Page 27

Browse online or download pdf Configuring for Gateway Cisco 3800 Series. Cisco 3800 Series 32 pages. Password recovery procedure
Also for Cisco 3800 Series: Datasheet (8 pages), Application Note (41 pages), Troubleshooting Manual (15 pages), Datasheet (20 pages), Quick Start Manual (40 pages), User Manual (7 pages)

Print Page

Configuring Radio Settings on an Access Point

DETAILED STEPS

Command or Action

Step 1

enable

Example:

Router> enable

Step 2

configure terminal

Example:

Router# configure terminal

Step 3

dot11 phone

Example:

Router(config)# dot11 phone

Step 4

end

Example:

Router(config-if)# end

Step 5

copy running-config startup-config

Example:

Router# copy running-config startup-config

Configuration Examples for Radio Settings on an Access Point

This section contains the following examples:

•

Configuring Radio Data Rates: Example

The following example shows how to disable the 1-Mbps data rate and set the rest of the data rates to

basic:

configure terminal

interface dot11radio 0

no speed basic-2.0 basic-5.5 basic-11.0

end

copy running-config startup-config

Configuring Radio Data Rates: Example

Configuration Examples for Radio Settings on an Access Point

Purpose

Enables privileged EXEC mode.

Enter your password if prompted.

•

Enters global configuration mode.

Enables IEEE 802.11 compliance phone support.

Returns to privileged EXEC mode.

(Optional) Saves your entries in the configuration file.