Cisco 3G MicroCell User Manual - Page 4

Browse online or download pdf User Manual for Gateway Cisco 3G MicroCell. Cisco 3G MicroCell 20 pages. At&t wireless network gps signal extender
Also for Cisco 3G MicroCell: User Manual (20 pages), Quick Start Manual (8 pages), User Manual (20 pages)

Print Page

IMPORTANT SAFETY INSTRUCTIONS

Notice to Installers

The servicing instructions in this notice are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that

contained in the operating instructions, unless you are qualified to do so.

Note to System Installer

For this apparatus, the cable shield/screen shall be grounded as close as practical to the point of entry of the cable into

the building.For products sold in the US and Canada, this reminder is provided to call the system installer's attention to

Article 800-93 and Article 800-100 of the NEC (or Canadian Electrical Code Part 1), which provides guidelines for proper

grounding of the cable shield.

This symbol is intended to alert you that uninsulated voltage within this product may have sufficient

magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside

part of this product.

Ce symbole a pour but d'alerter toute personne qu'un contact avec une pièce interne de ce produit, sous

tension et non isolée, pourrait être suffisant pour provoquer un choc électrique. Il est donc dangereux d'être en

contact avec toute pièce interne de ce produit.

This symbol is intended to alert you of the presence of important operating and maintenance (servicing)

instructions in the literature accompanying this product.

Ce symbole a pour but de vous avertir qu'une documentation importante sur le fonctionnement et l'entretien

accompagne ce produit.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type

plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for

your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement

of the obsolete outlet.

10) Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Unplug this apparatus during lightning storms or

when unused for long periods of time.

CAUTION: To reduce the risk of electric shock, do

not remove cover (or back). No user-serviceable

parts inside. Refer servicing to qualified service

personnel.

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Power Source Warning

A label on this product indicates the correct power source for this product. Operate

this product only from an electrical outlet with the voltage and frequency indicated

on the product label. If you are uncertain of the type of power supply to your home

or business, consult your service provider or your local power company.

The AC inlet on the unit must remain accessible and operable at all times.

Ground the Product

WARNING: Avoid electric shock and fire hazard! If this product

connects to cable wiring, be sure the cable system is grounded (earthed).

Grounding provides some protection against voltage surges and built-up

static charges.

Protect the Product from Lightning

In addition to disconnecting the AC power from the wall outlet, disconnect the

signal inputs.

Verify the Power Source from the On/Off Power Light

When the on/off power light is not illuminated, the apparatus may still be connected

to the power source. The light may go out when the apparatus is turned off,

regardless of whether it is still plugged into an AC power source.

Eliminate AC Mains Overloads

WARNING: Avoid electric shock and fire hazard! Do not overload

AC mains, outlets, extension cords, or integral convenience receptacles.

For products that require battery power or other power sources to operate

them, refer to the operating instructions for those products.

WARNING

20080814_Installer800