Cisco ASR 9000 Series Configuring Network Settings - Page 10

Browse online or download pdf Configuring Network Settings for Gateway Cisco ASR 9000 Series. Cisco ASR 9000 Series 26 pages. Line card
Also for Cisco ASR 9000 Series: Configuration Manual (46 pages), Configuration Manual (50 pages), Manual (24 pages), Configuring (46 pages), Manual (44 pages), Quick Reference Manual (7 pages)

Print Page

Implementing a Satellite nV System

Command or Action

Step 7

ipv4 address address

Example:

RP/0/RSP0/CPU0:router(config-nV)# ipv4

address 10.22.1.2

Step 8

end

commit

Example:

RP/0/0RSP0/CPU0:router(config)# end

RP/0/RSP0/CPU0:router(config)# commit

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide

HC-716

Configuring the Satellite Network Virtualization (nV) System on the Cisco ASR 9000 Series Router

Purpose

Specifies the IP address to assign to the satellite. ICPE sets up a

connected route to the specified IP address through all configured

ICLs.

Saves configuration changes.

•

When you issue the end command, the system prompts you to

commit changes:

Uncommitted changes found, commit them before

exiting(yes/no/cancel)?

[cancel]:

–

Entering yes saves configuration changes to the running

configuration file, exits the configuration session, and

returns the router to EXEC mode.

Entering no exits the configuration session and returns the

–

router to EXEC mode without committing the

configuration changes.

Entering cancel leaves the router in the current

–

configuration session without exiting or committing the

configuration changes.

Use the commit command to save the configuration changes to

•

the running configuration file and remain within the

configuration session.

OL-26061-03