Digitus Biometrics db ProxLock Installation Manual - Page 8
Browse online or download pdf Installation Manual for Door locks Digitus Biometrics db ProxLock. Digitus Biometrics db ProxLock 10 pages.
Print Page
Connect the cable to the Remote Node / db Sentry Controller – Step 4
Connect the RJ45 coupler to the RJ45 plug on the cable coming from the db ProxLock
rd
If the db ProxLock is being connected directly to a 3
-party access control panel, rather than Digitus
control equipment, skip straight to Step 5
Note that is a door needs to
Use the Digitus Application to connect between the RJ45 coupler and the Node or Sentry device.
be fully removed at any time, the lock can be unplugged from the RJ45 coupler, and re-attached once the door is replaced.
Locks are connected to the Remote Node or db Sentry's socket circled in the diagram below.
Each Remote Node / db Sentry Controller has two device inputs, Dev 1 and Dev 2.
Side View of Remote Node
Side View of db Sentry
It is recommended that for a cabinet with 2 doors, the front door is connected to Dev 1 and the back door is connected to
Dev 2.
Model: db ProxLock
Version: May 2017
Digitus Biometrics, Inc. 2017
Page 8 of 10