Cisco ASR 9000 Series Configuration Manual - Page 3
Browse online or download pdf Configuration Manual for Gateway Cisco ASR 9000 Series. Cisco ASR 9000 Series 50 pages. Line card
Also for Cisco ASR 9000 Series: Configuring Network Settings (26 pages), Configuration Manual (46 pages), Manual (24 pages), Configuring (46 pages), Manual (44 pages), Quick Reference Manual (7 pages)
Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
Release 4.0.1
Release 4.1.0
Contents
•
•
•
•
•
Prerequisites for Configuring Serial Interfaces
Before configuring serial interfaces, ensure that the following tasks and conditions are met:
•
•
•
•
OL-26061-03
Support for the following SPAs was added:
•
•
Support for the following SPAs was added:
•
•
Support for IPHC was added on the following SPAs:
•
•
•
•
Prerequisites for Configuring Serial Interfaces, page 501
How to Configure Serial Interfaces, page 514
You must be in a user group associated with a task group that includes the proper task IDs. If you
suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
You have installed a 2-Port or 4-Port Clear Channel T3/E3 SPA.
You should have the following SIP and any one of the following SPAs installed on the
Cisco ASR 9000 Series Router:
Cisco SIP 700 SPA Interface Processor
-
Cisco 1-Port Channelized OC-3/STM-1 SPA
-
Cisco 2-Port Channelized OC-12c/DS0 SPA
-
-
Cisco 1-Port Channelized OC-48/STM-16 SPA
-
Cisco 2-Port or 4-Port Clear Channel T3/E3 SPA
-
Cisco 4-Port Channelized T3/DS0 SPA
Cisco 8-Port Channelized T1/E1 SPA
-
Your hardware must support T3/E3 or T1/E1 controllers and serial interfaces.
The following hardware supports T3/E3 controllers and serial interfaces:
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPAs
-
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Cisco 1-Port Channelized OC-3/STM-1 SPA
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA
Cisco 4-Port Channelized T3/DS0 SPA
Cisco 8-Port Channelized T1/E1 SPA
Cisco 1-Port Channelized OC-3/STM-1 SPA
Cisco 4-Port Channelized T3/DS0 SPA
Cisco 8-Port Channelized T1/E1 SPA
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA
Prerequisites for Configuring Serial Interfaces
501