Cisco ATA 186 Datasheet - Page 3

Browse online or download pdf Datasheet for Gateway Cisco ATA 186. Cisco ATA 186 7 pages. Analog telephone adaptor
Also for Cisco ATA 186: Configuration (28 pages), Overview (11 pages), Overview Manual (11 pages), Configuration Manual (8 pages), User Manual (12 pages), Installation And Configuration Manual (13 pages), Instructions For Installing (6 pages), Configuration (6 pages)

Print Page

SYSTEM REQUIREMENTS

Regular analog telephones

10BaseT category-5 cable to access IP network

Power for AC/DC power adaptor

Voice-over-IP (VoIP) Protocols

SIP (RFC 2543)

SCCP

Voice Codecs*

G.729, G.729A, G.729AB2

G.723.1

G.711a-law

G.711µ-law

In simultaneous dual-port operation, the second port is limited to G.711 when using G.729.

Provisioning and Configuration

DHCP (RFC 2131)

Web configuration via built-in Web server

Touch-tone telephone keypad configuration with voice prompt

Basic boot provisioning (RFC 1350 TFTP Profiling)

Dial plan provisioning

Cisco Discovery Protocol for SCCP

Security

RC4 encryption for TFTP configuration profiles

Dual-Tone Multi-Frequency (DTMF)

DTMF tone detection and generation

Out-of-Band DTMF

RFC 2833 AVT tones for SIP, MGCP, SCCP

Call Progress Tones

Configurable for two sets of frequencies and single set of on/off cadence

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.

Page 3 of 7