Cisco ATA 186 Configuration - Page 4

Browse online or download pdf Configuration for Gateway Cisco ATA 186. Cisco ATA 186 6 pages. Analog telephone adaptor
Also for Cisco ATA 186: Configuration (28 pages), Datasheet (7 pages), Overview (11 pages), Overview Manual (11 pages), Configuration Manual (8 pages), User Manual (12 pages), Installation And Configuration Manual (13 pages), Instructions For Installing (6 pages)

Print Page

ProductId: ATA186I1

Features: 0x00000000

HardwareVersion: 0x0006 0x0000

Cisco ATA with V2.15 or 2.16 image(H323)

ata000d6508d994

Version: v2.16 ata18x (Build 030401a)

MAC: 0.13.101.8.217.148

SerialNumber: INM07276617

ProductId: ATA186I1

Features: 0x00000000

HardwareVersion: 0x0006 0x0000

Configuring Account,Network & Codec Settings for SIP :

Once you get the ATA configuration page on the browser, please enter/check the following values:

UIPassword is to be set to access password which will be known only to the user – recommended to have for security reasons

so that others can't make changes to the configuration.

UseTftp is to be set to 0.

Set Dhcp to 0 (Disabled) if you want to assign static IP address to ATA. If you want the ATA to get the IP address dynamically

assigned then set this to 1 (enabled). In most common scenario it is 0.

StaticIP is to be set to the IP allotted by the ATA

StaticRoute to be set to the default gateway entered earlier into the ATA.

StaticNetMask to be set to the mask entered earlier into the ATA.

( N.B. : you have already configured 3,4,5 parameters through IVR else you won't be able to view the ATA configuration on

your browser.)

1. Cisco ATA 186 Configuration