Cisco C1100TG-1N24P32A Hardware Installation Manual - Page 23

Browse online or download pdf Hardware Installation Manual for Gateway Cisco C1100TG-1N24P32A. Cisco C1100TG-1N24P32A 44 pages. Terminal gateway

Print Page

Install and Connect the Router

This chapter describes how to install and connect Cisco 1100 Terminal Gateway Routers to LAN and WAN

networks.

Warning

Read the installation instructions before using, installing or connecting the system to the power source.

Statement 1004

Warning

Only skilled person should be allowed to install, replace, or service this equipment. Refer to statement 1089

for description of skilled person. Statement 1090

Installing the Cisco 1100 Series Terminal Gateway Routers involve these tasks:

•

Unpack the router only when you are ready to install it. If the installation site is not ready, to prevent accidental

damage, keep the chassis in its shipping container until you are ready to install.

The router, accessory kit, publications, and any optional equipment you order may be shipped in more than

one container. When you unpack the containers, check the packing list to ensure that you have received all

listed items.

The Cisco 1100 Terminal Gateway Router can be installed in 19-inch (48.26-cm) or 23-inch (58.42-cm) racks.

Use the standard brackets shipped with the router for mounting the chassis.

Unpack the Router, on page 19

Rack Mount the Chassis, on page 19

Chassis Grounding, on page 23

Connect Power Cable, on page 25

Connect WAN and LAN Interfaces, on page 33

Configure the Router at Startup, on page 35

C H A P T E R

Hardware Installation Guide for the Cisco 1100 Terminal Gateway