Cisco C1100TG-1N32A Hardware Installation Manual - Page 43

Browse online or download pdf Hardware Installation Manual for Gateway Cisco C1100TG-1N32A. Cisco C1100TG-1N32A 44 pages. Terminal gateway

Print Page

Install and Remove Small Form Pluggable Modules and Field Replaceable Units

Warning

Blank faceplates and cover panels serve three important functions: they reduce the risk of electric shock and

fire; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the

flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers,

and rear covers are in place. Statement 1029

Remove and Replace SSD Storage

Before you begin

The M.2 storage module is a hardware that is 22mm wide and 80mm long. This hardware comes with different

storage capacities.

If you order M.2 storage module, the following are the steps to install it:

Procedure

Command or Action

Step 1

Remove the SSD panel from the bottom side of chassis by

unfastening the screws and keep the screws aside.

Purpose

Hardware Installation Guide for the Cisco 1100 Terminal Gateway

Remove and Replace SSD Storage