Digitus professional DN-80065 User Manual - Page 5

Browse online or download pdf User Manual for Switch Digitus professional DN-80065. Digitus professional DN-80065 8 pages. 8-port gigabit ethernet switch

Print Page

Chapter 3 Installing and Connecting the Switch

This part describes how to install your Ethernet Switch and make connections to it. Please

read the following topics and perform the procedures in the order being presented.

3.1 Installation

Please follow the following instructions in avoid of incorrect installation causing device

damage and security threat.



Put the Switch on stable place or desktop in case of falling damage.



Make sure the Switch works in the proper AC input range and matches the voltage

labeled on the Switch.



To keep the Switch free from lightning, do not open the Switch's shell even in power

failure.



Make sure that there is proper heat dissipation from and adequate ventilation around

the Switch.



Make sure the cabinet to enough back up the weight of the Switch and its

accessories.

3.1.1 Desktop Installation

Sometimes users are not equipped with the 19-inch standard cabinet. So when installing

the Switch on a desktop, please attach these cushioning rubber feet provided on the

bottom at each corner of the Switch in case of the external vibration. Allow adequate

space for ventilation between the device and the objects around it.

3.1.2 Rack-mountable Installation in 19-inch Cabinet

The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be placed

in a wiring closet with other equipment. To install the Switch, please follow these steps:

Attach the mounting brackets on the Switch's side panels (one on each side) and

secure them with the screws provided.