Digitus professional DS-55101 Manual - Page 6

Browse online or download pdf Manual for Extender Digitus professional DS-55101. Digitus professional DS-55101 7 pages. Set full hd, 130 m

Print Page
B. Connection
HDMI IN
Transmitter
C. Connection
1) Connect source device to Transmitter unit (TX), and display device to Receiver
unit (RX) via HDMI cables
2) Connect Transmitter unit (TX) and Receiver unit (RX) via network cables
(CAT5, CAT5e or CAT6)
3) Plug the power supply to Transmitter unit only, each unit will power up then
initialize itself, this HDMI extender works
D. IR User Guide
1)
IR blaster extension cable should plug in the IR OUT port of TX (Transmitter) unit
of HDMI extender, and the IR receiver extension cable should plug in the IR IN
port of the RX (Receiver) unit.
2)
The emitter of IR blaster should as close as possible to the IR receiver window of
the signal source device.
3)
Using the IR remote controller of the signal source device towards the IR receiver
(connected to the RX), to remote control source media playback.
DVD
cable
IR
Receiver
HDMI Cable
IR
HDMI Display