Cisco EVM-IPVS-16A Connecting - Page 2

Browse online or download pdf Connecting for Gateway Cisco EVM-IPVS-16A. Cisco EVM-IPVS-16A 15 pages. Analog video gateway network modules

Print Page

Information About the EVM-IPVS-16A Network Module

Figure 1

EVM

IPVS-16A

Warning

Equipment connected to outdoor cameras must be permanently grounded in accordance with national

and local codes. Statement 374

Hazardous voltages may be present in the outdoor camera cables under fault conditions. Disconnect

Warning

all cables from the outdoor cameras before servicing this equipment. Statement 376

This unit is intended for installation in restricted access areas. A restricted access area can be

Warning

accessed only through the use of a special tool, lock and key, or other means of security. Statement

1017

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Warning

Statement 1030

The compact flash module installed in the EVM-IPVS-16A network module is not field-replaceable.

Note

For software-related prerequisites and restrictions, see the Cisco Analog Video Gateway 1.0 Installation

Note

and Upgrade Guide at:

http://www.cisco.com/en/US/docs/video/cavg/cavginstall/cavginstall.html.

For EVM-IPVS-16A network module features and benefits, supported hardware and software, and other

Note

product information, see the Cisco Analog Video Gateway Network Module (EVM-IPVS-16A) Data

Sheet.

Video Ports

16 video ports are provided, video ports 0 and 1 can be configured for input or output. The remaining 14

video ports can be configured for input only.

Connecting Cisco Analog Video Gateway Network Modules to the Network

Cisco Analog Video Gateway Network Module (EVM-IPVS-16A) Faceplate

3210

Connecting Cisco Analog Video Gateway Network Modules to the Network