Cisco IOS Router Product Information - Page 5

Browse online or download pdf Product Information for Gateway Cisco IOS Router. Cisco IOS Router 11 pages. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Also for Cisco IOS Router: Getting Started Manual (12 pages), Application Note (41 pages)

Print Page
Cisco IOS Router Product Information
Partner Authentication Agent Configuration

Before You Begin

This section provides instructions for integrating the partners' product with RSA SecurID Authentication.
This document is not intended to suggest optimum installations or configurations.
It is assumed that the reader has both working knowledge of all products involved, and the ability to
perform the tasks outlined in this section. Administrators should have access to the product
documentation for all products in order to install the required components.
All vendor products/components must be installed and working prior to the integration. Perform the
necessary tests to confirm that this is true before proceeding.

Cisco configuration:

Log onto the Cisco remote access server and enter enable mode, by typing the word "enable" and giving
the enable password. Then enter configuration mode by typing "config t". You are now able to enter the
commands below to turn on authentication. To turn off one of the commands put the word "no" in front of
the command line and you will turn off that line.
Note: For remote access use the Cisco IOS Routers configuration
section.. For VPN access use the Cisco IOS VPN Router section.
Cisco IOS Routers
Note: CHAP authentication is not supported when using RSA SecurID
authentication.
Tacacs+ commands
aaa new-model
aaa authentication login default tacacs+ line enable
aaa authentication ppp default tacacs+
tacacs-server host xxx.xxx.xxx.xxx
tacacs-server timeout 120
tacacs-server key "your key"
RADIUS commands
aaa new-model
aaa authentication login default radius line enable
aaa authentication ppp default radius
radius-server host xxx.xxx.xxx.xxx auth-port 1645 acct-port 1646 key "your key"
radius-server timeout 120
5