Argos HOME Toddler Bed 723/9939 Assembly Instructions Manual - Page 2
Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing Argos HOME Toddler Bed 723/9939. Argos HOME Toddler Bed 723/9939 7 pages.
Print Page
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
. Check you have all the
components and tools listed on
pages 2 and 3.
. Remove all fittings from the
plastic bags and separate them
into their groups.
. Keep children and animals
away from the work area, small
parts could choke if swallowed.
. Make sure you have enough
space to layout the parts before
starting.
. Do not stand or put weight on
the product, this could cause
damage.
. Assemble the item as close
to its final position (in the same
room) as possible.
care and maintenance
. Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
. Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
IMPORTANT! KEEP IT FOR FUTURE REFERENCE,
READ IT CAREFULLY.
Warning: Do not place this child´s bed near heat sources, windows and other furniture
Warning: Do not use this child´s bed if any part is broken, torn or missing.
· Designed and manufactured to BS 8509:2008.
· Model: 707/3676 - 723/9939
·R etailer: Home Retail Group
· The bed is suitable for children aged from 18 months to 4 years.
· The bed is suitable for a mattres of 140cm in lenght and 69cm in
width.
· Periodically check that all fittings are always properly tightened.
· Children are likely to play, bounce, jump and climb on beds,
therefore the child´s bed should not be placed too close to other
furniture or windows, and should be placed either tight to any wall
or have a gap of 300mm between the wall and side of the bed.
. Assemble on a soft level
surface to avoid damaging the
unit or your floor.
. This product has been produced
from natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
. From time to time check
that there are no loose
screws on this unit.
. We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
. Parts of the assembly will be
easier with 2 people.
. Dispose of all packaging
carefully and responsibly.
. This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Note: if required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1