Cisco VG204XM Hardware Installation Manual - Page 41
Browse online or download pdf Hardware Installation Manual for Gateway Cisco VG204XM. Cisco VG204XM 48 pages. Voice gateways
Also for Cisco VG204XM: Quick Start Manual (19 pages)
Print Page
Powering On the Voice Gateway and Performing
the Initial Configuration
•
•
•
Powering On the Voice Gateway
Perform this procedure to power on your Cisco VG202, Cisco VG202XM, Cisco VG204, or
Cisco VG204XM voice gateway and to verify that the device completes its initialization and self-test.
Before You Begin
Before you power on the voice gateway, ensure that it meets the following requirements:
•
•
•
Procedure
Plug in the external power supply.
Step 1
The green OK LED lights up. If this does not happen, see the
The system displays the following message at the end of the bootup messages:
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]:
Enter no to proceed with manual configuration using the command-line interface (CLI):
Step 2
Would you like to enter the initial configuration dialog? [yes/no]: no
Would you like to terminate autoinstall? [yes]
Press Return to terminate autoinstall and to continue with manual configuration.
Step 3
The system displays several messages, ending with lines similar to the following:
OL-15959-01
Powering On the Voice Gateway, page 4-1
Performing the Initial Configuration, page 4-2
Troubleshooting, page 4-6
The chassis is securely mounted. See
Chassis on a Desktop, page
The power cable is connected. See
The interface cables are connected. See
and
Connecting an FXS Line, page
Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide
C H A P T E R
Mounting the Chassis onto a Wall, page 3-5
3-7.
Connecting Input Power to the Chassis, page
Connecting a Terminal or PC to the Console Port, page 3-10
3-11.
4
and
3-10.
"Troubleshooting" section on page
Setting the
4-6.
4-1