Epson Stylus Scan 2500 Setup Manual - Page 14

Browse online or download pdf Setup Manual for Scanner Epson Stylus Scan 2500. Epson Stylus Scan 2500 35 pages. Epson imaging products (scanners, digital cameras, and stylus scan devices) compatibility chart for macintosh os x classic
Also for Epson Stylus Scan 2500: User Manual (7 pages), Product Information Sheet (4 pages), Specifications (2 pages), Product Information Sheet (4 pages), Product Support Bulletin (12 pages), Product Information (12 pages), Start Here (4 pages), Manual (11 pages), Product Support Bulletin (3 pages), Parts List (9 pages), Online Manual (10 pages), Start Here (4 pages), Supplemental Information (12 pages)

Print Page

Note:

Be sure to calibrate your screen and Stylus Scan to ensure that the colors of

reproduced images closely match the originals.

11. In the following window, move the slider to the right or left until the two shades

of gray horizontal stripes match.

Note:

The gray stripes will not perfectly blend together; however, try to make the two

tones match as closely as possible.

12. Click OK to register the calibration setting.

13. When the EPSON Stylus Scan Drivers installation is complete, installation for

other applications begins automatically. Follow the on-screen instructions.

14. After all applications have been installed, a message appears asking you to restart

your computer. Click OK.

15. Restart the computer, then turn on the Stylus Scan by pressing its

Note:

Do not change the printer name (leave it as EPSON Stylus Scan 2500),

otherwise your Stylus Scan does not work correctly.

For Windows 98 with a USB connection

Before connecting the Stylus Scan to your Windows 98 computer using the USB port,

you must first install the Stylus Scan software. This section guides you through the

software installation and also includes instructions on connecting to your computer

using the USB port. Follow the steps below.

Note:

The USB connection cannot be used with Windows 95.

Make sure the Stylus Scan is off, and that it is not connected to your computer.

Then turn on the computer and start Windows 98.

Setting up your Stylus Scan 2500

power button.