Epson TM-H6000IIIP Development Manual - Page 10
Browse online or download pdf Development Manual for Scanner Epson TM-H6000IIIP. Epson TM-H6000IIIP 26 pages.
Also for Epson TM-H6000IIIP: Development Manual (45 pages), Development Manual (32 pages)
Print Page
2.4 Device Settings
The following explanation is about the settings for TM-H6000III.
2.4.1 Usable Device Specific Settings
For the TM-H6000III, the following device specific settings are settable by the
SetupPOS utility. For the detail, please refer to the Section 2 of "EPSON OPOS
ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)"
Tab
General
Paper
Slip
Bitmap
Color Bitmap
Status Log
Default Value
Printing Properties
*1
The settings can be changed when using a connection other than serial.
*2
Available only for the multilingual character models.
Disable panel buttons
Assume print complete when data output finishes
Homogenize Error Codes
Ignore firmware version check
Output complete timeout [s]
Paper Type
Paper Width [mm]: LineWidth [dot]: LineCharsList
Removal feed length [line]
Reverse feed removal
Blink LED with BeginInsertion
TMFlogo...
NVRAM
Halftone: Method
Halftone: Brightness
Color: Primary
ERROR
OFFLINE
Log file name (full path name)
Maximum file size [KB]
Multilingual font
Endorsement installation
Receipt Characters per Line
Receipt Line Spacing [dots]
Slip Characters per Line
Slip Line Spacing [dots]
CharacterSet [CodePage Number]
7
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H6000III)
Version 3.00 Feb. 2019
Settings
*1
*2