Epson XP-241 Start Here - Page 3
Browse online or download pdf Start Here for Scanner Epson XP-241. Epson XP-241 4 pages.
Print Page
Mobile printing
To print from a mobile device, your product must be set up for
wireless printing or Wi-Fi Direct
for instructions.
Epson Connect
Solutions
™
Epson Connect offers a variety of remote printing options for
your product. Connect wirelessly from your tablet, smartphone,
or computer. Print documents and photos from across the
room or around the world.
www.epson.com.jm/connect
Epson iPrint
for iOS/Android
™
Download the Epson iPrint app from the App Store or Google
Play
to print documents and photos from your iOS or Android
™
device on any email-enabled Epson printer.
Control panel
Turns the printer on or off.
Clears a network error. Hold down for more than three
seconds to make network settings using the WPS button
on a wireless router. See the online User's Guide.
Prints a network connection report to determine
the causes of any network problems. To get more
information, hold this button down for more than 10
seconds to print a network status sheet.
Starts monochrome or color copy. Press both buttons
simultaneously to scan your original and save it as PDF
on your PC. (USB connection only)
Stops the current operation. Press this to replace an ink
cartridge when an ink cartridge is expended.
Turns on or flashes to indicate a paper-related error.
Turns on or flashes to indicate an ink-related error.
. See the online User's Guide
®
™
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
•
Make sure you select the right network name (SSID).
•
The printer can only connect to a network that supports
2.4 GHz. If your router offers both 2.4 GHz and 5GHz
connections, make sure 2.4 GHz is enabled.
•
If you see a firewall alert message, click Unblock or Allow to
let setup continue.
Setup is unable to find my printer after connecting it
with a USB cable.
Make sure the printer is turned on and that it is securely
connected as shown:
There are lines or incorrect colors in my printouts.
Run a nozzle check to see if any of the print head nozzles are
clogged. Then clean the print head, if necessary. See the online
User's Guide for more information.
Error indicators
If you see one of the error indicators below, follow the steps
here to proceed:
On
Flashing slowly
Paper is out or multiple pages have fed into the paper
feed slot. Load paper correctly, then press
Paper is jammed. Remove any jammed paper from
inside the product or from the paper feed slot. Make sure
your paper is loaded correctly, then press
An ink cartridge is expended, not installed correctly, not
recognized, or unsupported. Replace or reinstall the
cartridge.
The ink pads are near the end of their service life.
Contact Epson for support. (To continue printing, press
or
.)
Printer error. Turn off the product and check that no
protective material or other foreign object has been left
inside the product.
Wi-Fi connection error. Press the Wi-Fi button on the
printer to clear the error and try again.
An error has occurred during firmware updating. Connect
your product using a USB cable and try updating the
firmware again. If the error message continues, contact
Epson for support.
Flashing quickly
or
.
or
.