DigiWeigh A12 Manual - Page 3

Browse online or download pdf Manual for Scales DigiWeigh A12. DigiWeigh A12 7 pages.

Print Page

2.1 POWER ON AND AUTO ZERO-SETTING

1 The indicator will perform countdown self-checking when turned on. Then it will

enter weighing mode.

2 When powered on, if loading weight on the scale deviates from the zero point, but

still within zero set range, the indicator will set zero automatically; if it is out of

range, it is necessary to adjust the zero point or recalibrate or reset.

3 Press UNIT button to select your weighing unit. There is indication on the readout

panel showing the current weighing mode.

2.2 MANUAL ZERO SETTING

1 In weighing mode, you can press [Zero] anytime to zero the readout.

2 If the displayed value deviates from zero point, but still within zero-range, pressing

[Zero] key is available. Otherwise, [Zero] key is invalid. (In this status, please

recalibrate or reset zero parameters)

3 Zero function works only when the STAB sign is on.

2.3 TARE FUNCTION

When Indicator is in weighing mode, press the [Tare] key, the indicator will deduct the

displayed weight value as tare weight. Then indicator displays net weight as "0", and

Tare sign is on.

2.4 COUNTING FUNCTION (WHEN F3 KEY=1)

Sampling: Tare the weight of any container that is used and leave the container on the

scale. Place samples on the scale. The quantity of the samples should match the

options for the pre-set values: 10, 20, 50, 100 or 200 pieces. Press [MOD] key and

the screen will show "P10", which means the requirement of the sample size. If the

sample quantity on the scale is not 10 pieces, press [TARE] key to select the

according sample size. Press [FUN] key to confirm.

Counting: Remove the samples from the container and place the items need to count into

the container. You can see the counts on the display. Press [FUN] key to view Unit

Weight (in gram), Counts and Total Weight. You may exit counting mode anytime by

pressing [MOD] key.

2.5 ACCUMULATING FUNCTION (WHEN F3 KEY=2)

Floor / Pallet Scale

(Graph 2-3) Drawing of connecting of load cell

Chapter 2 Operation