DigiWeigh DW97PAM04 User Manual - Page 13

Browse online or download pdf User Manual for Scales DigiWeigh DW97PAM04. DigiWeigh DW97PAM04 16 pages. Digital counting scales

Print Page

1. Press the ALARM key while the scale is loaded or unloaded. Hi will show

in the weight display

2. Key in the high limit count value and press the ALARM key again.

3. Now Lo will be displayed. Key in the low limit count value and press the

Smpl key to store the value and return to the normal counting mode

4. To disable the function, follow the above steps entering " 0" for the high

and low preset values

ACCUMULATED TOTAL(Count or Weight)

The values (weight and count) shown on the display can be added to the

values in the memory as follows

1. Press the ADD key. The "Weight" display will show the total weight,

the "Count" display will show the total accumulated count, and the

"Unit Weight" display will show the number of times that items have

been added to the accumulation memory. The values will be displayed

for 2 seconds before returning to normal.

2. The scale must return to zero or a negative number before another

count or weight can be added to the memory.

3. Additional product can then be weighed or counted and the ADD key

pressed again. This can continue for up to 99 entries, or until the

weight capacity is reached.

4. To observe the total stored press the TOTAL key. The totals will be

displayed for 2 seconds.

5. To clear the memory press TOTAL to recall the totals from memory

and then press the CLEAR key to clear all values from memory.

The scales can be operated from the battery if desired. The battery life is

approximately 70 hours. When the battery needs charging the arrow above

the low battery symbol under the COUNT/PCS display will turn on. The

battery should be charged as soon as the arrow above the symbol is on. The

scale will still operate for about 10 hours after which it will automatically

switch off to protect the battery. To charge the battery, simply plug the AC

Adapter into the scale and the AC power outlet. IF the LED is red, the battery

is receiving a charge. The scale does not need to be turned on. The battery

should be charged for 12 hours for full capacity. When the battery life

becomes unacceptable then contact DigiWeigh or Scales USA for current

replacement information.

Page 13 of 16