Epson 1520 - Stylus Color Inkjet Printer Quick Setup Manual - Page 7

Browse online or download pdf Quick Setup Manual for Printer Accessories Epson 1520 - Stylus Color Inkjet Printer. Epson 1520 - Stylus Color Inkjet Printer 21 pages. Epson stylus color 1520 printer quick setup
Also for Epson 1520 - Stylus Color Inkjet Printer: User Manual (34 pages), User Manual (38 pages), User Manual (35 pages), Specifications (2 pages), User Manual (13 pages), Cartridges Replacement (2 pages), Product Information Sheet (4 pages), Brochure (1 pages), Specifications (1 pages), Supplement (1 pages), Quick Setup Manual (17 pages)

Print Page

5. Slide out the rear paper support guide until

it stops.

6. Fan a stack of paper and then even the edges.

7. Load the stack with the printable side face

down. (The printable side is usually whiter

and brighter.) Slide the stack all the way into

the feeder, with one edge of the stack

touching the right edge guide.

8. Slide the left edge guide against the left side

of the paper. Then slide the rear paper

support against the end of the paper.

9. Lower the output tray.

Test the Printer

1. Turn off the printer and wait until the

2. While holding down the

button.

Load/Eject

The first page prints on the first and last lines to measure the page length. The next sheet

prints a multicolor nozzle check pattern and character samples at 360 dpi (dots per inch).

3. After the second page prints, press the

button to eject any paper remaining in the sheet feeder.

Load/Eject

Caution:

Never turn off the printer while it's printing test pages. Always press the

Pause button and eject any loaded paper first.

Operate

button, turn the printer on. Then release the

Load/Eject

button to stop the test. Then press the

Pause

light turns off.

Quick Setup