DigiWeigh DWP-1001 Operator's Manual

Browse online or download pdf Operator's Manual for Scales DigiWeigh DWP-1001. DigiWeigh DWP-1001 2 pages. Precision tabletop balance

Print Page

DWP-1001

Operator's Manual

Congratulations for purchasing DIGIWEIGH precision tabletop balance. With normal care and proper

treatment, the scale will provide years of reliable service. Please take a few minutes to read the Operator's

Manual so that you can become acquainted with the proper usage and special features of your DIGIWEIGH

scale.

SPECIFICATIONS

Please check the rating label located on the bottom of your scale and find the capacity and readability.

HOW TO USE THE SCALE

Place the scale on a rigid horizontal flat surface.

Press ON/OFF button to switch on the scale and wait until "0.0" is showed on the display screen. Please

make sure the scale is under the environment with stable temperature.

Put the object(s) on the center of the platform. Wait until the display is stable. The readout equals the

weight of the object(s) on the platform.

Press MODE button to choose different weighing units.

After use, just press ON/OFF to switch off the scale.

HOW TO USE TARE FUNCTION

Tare function can make it easier to weigh tiny things or liquid.

Press ON/OFF button to switch on the scale. Put the container of weighing object(s) on the center of

platform, press TARE button and the screen shows "0.0". Take the container off and put the weighing

object(s) in the container and put the container again on the center of the platform.

Wait until the screen is stable, the readout equals the weight of the weighing object(s).

HOW TO USE COUNTING FUNCTION

Your scale has counting function for small parts. Please follow these steps:

Sampling: Prepare sample quantity (25, 50, 75 or 100 PCS) of the items you want to count; put the items on

the platform; press and hold PCS button until the scale shows "P 25" or "P 50" or "P 75" or "P 100"; press

MODE button to switch the above figures to match the quantity of the items on the platform; press PCS

again and the scale will switch back to weighing mode; Sampling completed.

Counting: Put the items you want to count on the platform of the scale; press PCS button and the scale will

show the quantity of these items.

You don't have to do the sampling again if you count the same item, even the scale is turned off and turned

on. If you want to count another item, you need to redo the sampling.