Epson 203B20BYPX Instruction Manual
Browse online or download pdf Instruction Manual for Printer Accessories Epson 203B20BYPX. Epson 203B20BYPX 2 pages. Shrink tube
Print Page
Shrink Tube Instruction Manual
Shrink tube - information deemed reliable but not guaranteed. See manufacturer's
speci cation sheet for further information. Test for your applications.
2001XLST, 2011XLB, 2012XLST, BEE3®, BEE3®+, 2020LSTB, 2020LSTB-PC, 2010-PC, 2011XLB-PC, 2012XLST-PC, PEAR
Label ® 270, PEAR Label ® 360, BEE3®-EZ, BEE3®-EZ+, LW-PX900, LW-PX800, LW-PX750, LW-PX700, LW-PX400,
LW-PX350, LW-PX300, LW-Z5010PX, LW-Z5000PX
PART NO.
INK
TUBE
SIZE
*Compatibility
COLOR
COLOR
203STBWPX-90
BLACK
WHITE
1/8"
203B20BWPX
BLACK
WHITE
1/8"
203B20BYPX
BLACK
YELLOW
1/8"
205STBRPX
BLACK
RED
3/16"
205STBYPX
BLACK
YELLOW
3/16"
205STBWPX
BLACK
WHITE
3/16"
205STWBPX
BLACK
3/16"
WHITE
205YLBBPX **
YELLOW
3/16"
BLACK
205STBGPX
BLACK
GREEN
3/16"
208STBWPX-90
BLACK
WHITE
1/4"
208B20BYPX
BLACK
YELLOW
1/4"
208B20BWPX
BLACK
WHITE
1/4"
210STBWPX
BLACK
WHITE
3/8"
210STBWPX-90
BLACK
WHITE
3/8"
211STBRPX
BLACK
RED
1/2"
211STBYPX
BLACK
YELLOW
1/2"
211STBWPX
BLACK
WHITE
1/2"
211STWBPX
BLACK
1/2"
WHITE
214STBWPX **
BLACK
WHITE
9/16"
214STBYPX **
BLACK
YELLOW
9/16"
221STBWPX **
BLACK
WHITE
7/8"
221STBYPX **
BLACK
YELLOW
7/8"
B203STBW ***
BLACK
WHITE
1/8"
B203STBY ***
BLACK
YELLOW
1/8"
B208STBW ***
BLACK
WHITE
1/4"
B208STBY ***
BLACK
YELLOW
1/4"
BL203STBWX25 ***
BLACK
WHITE
1/8"
BL208STBWX35 ***
BLACK
WHITE
1/4"
BL203STBYX25 ***
BLACK
YELLOW
1/8"
BL208STBYX35 ***
BLACK
YELLOW
1/4"
Part Number & Model Notes: *BEE3®, BEE3®-EZ, LW-PX300 use only 203 & 205 shrink tube sizes. BEE3®+,
BEE3®-EZ+, & LW-PX350 use 203 through 211 sizes. LW-PX400, LW-PX700 & LW-PX750 use only 203-214 sizes.
**Cannot be used with PEARLabel® 360
***Bulk Label Quick Kit only
For all "20#ST" Supplies
Shrinkage Rate:
50% or more in diameter, 15% or less in length. Ratios noted.
Temperature Range:
-55ºC to 125ºC (Operating)
Compliance Standards:
UL Standard 224 (Rated Temperature: 125°C, Rated Voltage: 300V,
Flame Resistance Grade VW-1), RoHS compliant
Internal
Range
Diameter
SHRINK
of Wire
AWG
as supplied
Diameter
RATIO
mm (min)
(in)
16-22
3:1
3.2
.044-.105
14-22
3:1
3.8
.055-.150
14-22
3:1
3.8
.055-.150
8-12
2:1
5.7
.130-.205
8-12
2:1
5.7
.130-.205
8-12
2:1
5.7
.130-.205
8-12
2:1
5.7
.130-.205
10-18
3:1
5.4
.075-.205
10-20
3:1
4.8
.069-.160
6-18
3:1
6.4
.091-.215
6-18
3:1
7.0
.095-.240
6-18
3:1
7.0
.095-.240
4-12
3:1
9.5
.138-.315
4-12
3:1
9.5
.138-.315
2-8
2:1
10.9
.228-.409
2-8
2:1
10.9
.228-.409
2-8
2:1
10.9
.228-.409
2-8
2:1
10.9
.228-.409
0-5
2:1
13
.303-.492
0-5
2:1
13
.303-.492
0000-1
2:1
20
.461-.768
0000-1
2:1
20
.461-.768
14-22
3:1
3.8
.044-.105
14-22
3:1
3.8
.044-.105
6-18
3:1
7.0
.091-.215
6-18
3:1
7.0
.091-.215
14-22
3:1
3.2
.056-.122
6-18
3:1
6.4
.095-.236
14-22
3:1
3.2
.056-.122
6-18
3:1
6.4
.095-.236
• Although the tube is made of insulating materials (polyole n), it does not meet the standards set for insulated tube
construction. Do not use the tube in locations where withstand voltage capability is required.
User Precautions
• Prints may appear distorted due to special surface materials. Prints may become diminished if the surface of the
tube is scratched or wiped with paint thinner, etc.
• When the tube shrinks, the printed characters may become distorted and di cult to read. Printed bar codes may
Range
also become undecipherable.
of Wire
• This product is not intended for use on any person or animal.
Diameter
• Avoid storing this product in places with high temperatures or humidity. Do not expose this product to direct
(mm)
sunlight, dust particles or the outdoors. For best results, use this product immediately after it is removed from its
packaging.
1.11-2.66
1.40-3.30
Shrink Tube material requires a higher ribbon concentration to print solid characters on the thicker
shrink tube material. Based on your machine model, follow these instructions to increase print density.
1.40-3.30
3.30-5.20
1. Set the cartridge in the printer.
3.30-5.20
FOR LW-PX350
3.30-5.20
2. Press "Shift" + "Condition". Arrow down to "PrnDensity"
3.30-5.20
and press "Return".
3. Now arrow to "+3" and press Return.
1.90-5.20
4. Now enter characters. Then Print.
1.75-4.06
FOR LW-PX300
2.31-5.46
2. When the power is o , press "Print" + "Power".
2.40-6.10
3. Arrow to +3, and press "Enter".
4. Now enter characters. Then print.
2.40-6.10
FOR LW-PX800
3.50-8.00
2. Create label using Label Editor Software.
3.50-8.00
3. Choose File, Printer Settings. On the Graphics Tab,
5.80-10.40
Move concentration to + 3. Click OK. File. Print.
5.80-10.40
5.80-10.40
Surface Mounting
5.80-10.40
1. Place the tube over the wire or cable.
7.70-12.50
2. Blow hot air across the tube using a heat gun* to shrink the tube.
7.70-12.50
3. When the tube ts snugly against the surface, the shrinking process is nished.
DO NOT OVER HEAT THE SHRINK TUBE MATERIAL.
11.70-19.50
* Use a heat gun when performing the heat shrinking process in order to
11.70-19.50
achieve proper shrinking levels.
1.11-2.66
Use only a heat gun that meets industrial standards during the heat shrinking process. Use caution when
1.11-2.66
handling the heat gun.
2.31-5.46
Do not use soldering irons, cigarette lighters, an open ame or home hair dryers to avoid the accidental
ignition of a re.
2.31-5.46
Do not apply heat to any surface for an extended period of time, even when the operating temperature
1.40-3.10
is within the recommended range.
2.40-6.00
Coloring of the tube may be altered, characters may disappear, and surfaces may be damaged or
discolored depending on the construction of the surface, the environmental conditions and the
1.40-3.10
conditions during adhesion.
2.40-6.00
Please select an unnoticeable location for testing the actual results of the product prior to use.
Avoid surfaces that do not provide su cient heat resistance. Heat shrinking can damage surfaces that
are not conducive to high temperatures.
Avoid direct contact with the tubes during or immediately after shrinking to prevent injuries.
Epson LABELWORKS PX
P: 800.622.6312
For LW-PX400 & iLabel App
(the datacom app has no density setting)
1. Tap the [gear] icon at the bottom right corner and
adjust to +3.
For LW-PX900, LW-PX750 & LW-PX700, LW-Z5010PX,
LW-Z5000PX
Print density is automatically set. No further settings are
necessary.
370 SMC Drive, PO Box 309, Somerset WI 54025
| labelworks.epson.com
413762601