DIGMESA FC User Manual - Page 5

Browse online or download pdf User Manual for Controller DIGMESA FC. DIGMESA FC 12 pages. Flow controller

Print Page

2.2

Connection measuring device

Confusing the negative and positive cable may destroy the measuring device!

You will require an MSD with 3 contacts (Item No. 941-0002/3) in order to

connect the measuring device to the FC. This MSD may need to be ordered

additionally, depending on the particular measuring device.

Connect the MSD to the measuring device as specified in Point 2.1 (Page 4),

Point 1 to Point 3.

Now plug the rubber seal

device, earthing symbol plug to (signal symbo

housing

is pointing, dependent on local conditions. Now tighten with the fixing screw .

Now guide the rubber seal , washer

the housing

over the plug. You yourself can determine in what direction the cable

and tighten them so that the cable is held firmly and tightly.

Page 5

and plug with 3 contacts onto the measuring

and plastic screw

measuring device). Guide the

over the cable into