TomTom LINK 510 User Manual - Page 17

Browse online or download pdf User Manual for GPS TomTom LINK 510. TomTom LINK 510 37 pages. Vehicle tracking device
Also for TomTom LINK 510: Installation Manual (35 pages), Installation Manual (16 pages)

Print Page

Connecting to power

Connect the LINK 510 to the vehicle power supply with the standard vehicle voltage (12 V/24 V).

Do not connect to a voltage converter. The three wires GND, IGN and PWR+ (supply voltage)

must be connected.

Important: Follow the order of connecting the wires as described below. First connect the wires

then insert the plug into the LINK 510.

If you have inserted the plug into the LINK 510 first, you must connect the GND wire before you

connect the PWR+ wire and the IGN wire as described below.

1. Connect the GND wire (brown) to ground (clamp 31).

2. Connect the PWR+ wire (red) to the carry current (clamp 30).

The connection must be fused with max. 10A. If not, fuse the the PWR+ wire with one 2A fast

blow fuse.

3. Connect the IGN wire (black) to ignition (clamp 15).

The connection must be fused with max. 10A. If not, fuse the the IGN wire with one 2A fast

blow fuse.

4. Insert the 3-pin plug into the power cable connector.

If you need to disconnect the wires while the 3-pin plug is plugged in the LINK 510 make sure you

disconnect the GND wire last.