TomTom LINK 510 User Manual - Page 25

Browse online or download pdf User Manual for GPS TomTom LINK 510. TomTom LINK 510 37 pages. Vehicle tracking device
Also for TomTom LINK 510: Installation Manual (35 pages), Installation Manual (16 pages)

Print Page

Resetting the LINK 510

If your LINK 510 does not operate properly or

reset the unit. Only restart or reset the LINK 510 after you have made sure you have carried out all

previously described steps without success.

Restarting your LINK

To restart your LINK 510, press the reset button with a thin pointed object until it clicks and keep it

pressed down for 1 to 2 seconds. The LINK 510 restarts immediately after releasing the button.

If restarting the device does not succeed remove the power cable from the LINK 510. Then plug it

into the power cable connector again.

Resetting your LINK to factory settings

To reset the LINK 510 to factory settings, press the reset button with a thin pointed object until it

clicks and keep it pressed for 8 seconds. The LINK 510 reboots immediately after releasing the

reset button. You can count the seconds with the help of the flashing of the green LED, that

flashes once per second.

Important: All information stored on the LINK 510 is deleted during a factory reset.

If resetting the device does not succeed, do the following:

1. Remove the power cable from the device.

2. Press the reset button with a thin pointed object until it clicks and keep it pressed.

3. Insert the power cable while keeping the reset button pressed for 8 seconds.

You can count the seconds with the help of the flashing of the green LED, that flashes once

per second.

The LINK 510 reboots immediately after releasing the reset button.

signals a system error

you may need to restart or