Epson P7000 - Multimedia Photo Viewer Product Support Bulletin - Page 5
Browse online or download pdf Product Support Bulletin for Printer Accessories Epson P7000 - Multimedia Photo Viewer. Epson P7000 - Multimedia Photo Viewer 28 pages. Surecolor p-series
Also for Epson P7000 - Multimedia Photo Viewer: Product Support Bulletin (17 pages), Brochure & Specs (6 pages), Basic Operation Manual (29 pages), Instruction Manual (46 pages), Instructions (2 pages)
Print Page
Power off the viewer and remove the Compact Flash or SD memory card. Then turn the viewer
back on. Note: Do not press any keys when turning on the unit.
Set the Date and Time if prompted.
On the Home screen, press the Menu key. Select [Settings], then [Delete all cache files].
Press OK. If you see a dialog box prompting you to connect the AC adapter, click OK. You will
then see a progress bar until the process is completed.
Open Settings from the Home screen and select Device Information. In Device Information
select Firmware Version. The new firmware version
"02.60.0355-0110-0200-0124
" will be
displayed under [Copyright(C) 2008 SEIKO EPSON CORP.] This means that the firmware
update has completed correctly.
NOTES:
IMPORTANT: If you update to firmware Ver 1.57 temporarily before updating to 2.51,
PLEASE DO NOT TURN OFF THE UNIT DURING THE IPL UPDATE. If it is interrupted,
DAMAGE to the Viewer's MAIN BOARD may occur and the unit will need to be repaired.
If the firmware 2.60 update failed, or if the viewer was inadvertently turned off during firmware
update (except IPL update on Ver1.57 as mentioned above), please perform following steps:
1. Remove the "PSV50260.FNC" file from the PSV5FIRM folder on the memory card that
is used in this update.
Page 5 of 6
PSB.2012.01.001