Epson PLQ-20 Setup Manual - Page 16

Browse online or download pdf Setup Manual for Printer Accessories Epson PLQ-20. Epson PLQ-20 20 pages. 24-pin dot matrix printers
Also for Epson PLQ-20: Specifications (2 pages), Specifications (2 pages), Specifications (2 pages)

Print Page

Never use a stand that tilts the printer. The printer should

always be kept level.

Position your printer's power cord and interface cable so they

do not interfere with paper feeding. If possible, secure the

cables to a leg of the printer stand.

When maintaining the printer

Unplug the printer before cleaning it, and always clean it with

a piece of damp cloth only.

Do not spill liquid onto the printer.

Except as specifically explained in this guide, do not attempt

to service the printer yourself.

Unplug the printer and refer servicing to qualified service

personnel under the following conditions:

If the power cord or plug is damaged.

ii. If liquid has entered the printer.

iii. If the printer has been dropped or the cabinet damaged.

iv. If the printer does not operate normally or exhibits a

distinct change in performance.

Adjust only those controls that are covered by the operating

instructions.

If you plan to use the printer in Germany, observe the

following:

To provide adequate short-circuit protection and

over-current protection for this printer, the building

installation must be protected by a 10- or 16-amp circuit

breaker.

Safety Instructions