Crowcon C-Test User Manual - Page 5

Browse online or download pdf User Manual for Test Equipment Crowcon C-Test. Crowcon C-Test 12 pages. Gas (bump) test and calibration station for use with the crowcon clip and crowcon clip+

Print Page
Crowcon C-Test User Manual

4. Orientation

C-Test Components:

5. Maintenance

The C-Test Station should be examined before and after use to ensure that all components are in
operating order and undamaged.
Ensure that the gas cylinder has adequate gas for testing purposes.
Examine monitor bay to ensure that each opening is free and clear of debris.
Examine the AC power module and ensure it is undamaged and firmly connected.
If/When needed clean the C-Test with a soft non-static cloth.

6. Specification

Size: H 212 x W 275 x D 122 mm (8.3 x 10.8 x 4.8 inches)
Warranty: 1 Year
Battery Type: Rechargeable Lithium Ion
Memory: USB-2 GB Standard (Note: larger memory capacity can be used)
Tests Performed: Bump Test and Calibration
Information Stored: Bump/Calibration Logs, Individual monitor Event Logs, Monitor and C-Test
Firmware, and Unit Configurations
Configuration: Unit settings (configuration and firmware) can be programmed/upgraded via the C-Test.
Gases Available: H
S, CO, and O
2
Unit Compatibility: Works only with Crowcon Clip and Crowcon Clip+ monitors
Calibration Gas: Compatible with 34l, 58L or 116L bottles;
An accessory is available to allow use of larger gas cylinders, contact Crowcon or your local service
agent for details.
Issue 1 - June 2012
2
1
Charging Port
2
Calibration Gas Port
3
Gas Exhaust Outlet
4
IR Communication Window
5
Test Activation Buttons
6
Pressure Gage
7
USB Memory Cover
Power and Test LED's
8
9
Monitor Bay
Page 5