Dill TPMS 1502 Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Automobile Accessories Dill TPMS 1502. Dill TPMS 1502 16 pages. Trailer kit

Print Page

1.5 Position of Transmitter and ID module

Note the default installation position of the transmitter and ID modules as

illustrated. A letter identifier marked on the transmitter, ID module, and hex nut

is shown on each component.

The letters "LF/RF/LR/RR" on the back of the display unit correspond to the

tires' respective positions. Each pair of transmitter and ID module need to be

installed in the same position.

To access the ID modules, pull the ID module cover away from the display unit.

For example, if you install transmitter "A" in the left front tire, then you should

plug the ID module "A" in "LF" position on the receiver.

NOTE:

When installing the ID chips into the display unit verify the ID letters are facing

towards the back of the display and is in the correct orientation. Small clip must

face the back, regardless if the letter identifier is facing the

Large clip

faces towards

front of display.

ID MODULE COVER

080908-1101134

Transmitter I.D.

wrong orientation.

Small clip must

face towards the

back of the display.

1101143

I.D. Module

Hex Nut I.D.