Dillenger Cheetah Manual - Page 3

Browse online or download pdf Manual for Bicycle Dillenger Cheetah. Dillenger Cheetah 13 pages. Folding bike

Print Page

SSEMBLY

It is very important to follow these instructions carefully before using this product for the first time.

The bike will arrive fully assembled but in a stored state. Before it can be ridden please complete the

following steps:

1. Remove the bike from packaging. Remove the zipties holding the components together for shipping.

2. Locate and separate the pedals and charger (smaller box within).

3. Lift the back of the bike up and place the stand in the down position.

4. The handlebars will already be assembled. The handlebars fold on an angle for easy collapsing of the

Cheetah. The handlebar folding joint has a different mechanism to the main folding joint.

5. Attach the pedals using the 15mm spanner provided. Each pedal will only fit on its respective side; they

are marked for easy installation either with a sticker on the pedal or embossed on the end of the

threaded section. A 15mm spanner is needed for this (or 5/8").

6. A 13mm spanner (or 1/2") must be used to fasten the seat angle in place. The horizontal seat

adjustment bolt is tightened enough to prevent the black fastening nuts from coming loose, but

will need to be tightened further before a first use. Select the correct angle for your riding

position and then fasten the black fastening nuts on either side of the horizontal bolt running

through the seat bracket.

7. Check the tyre pressures and inflate to amount recommended on the tyre sidewall (40-50PSI)

8. It's best to charge the battery fully before a first use. This may take up to 6-8 hours

9. Make sure the battery is locked into the frame with the ignition key to prevent the battery from losing

connectivity over a bump

10. Turn the key and ride!

AFETY

Helmet:

Always wear an approved helmet when riding your Dillenger electric bike and follow the helmet

manufacturer's instructions for fit, use and care of your helmet. It's your responsibility to familiarise

yourself with the laws of the areas where you ride and to comply with all applicable laws.

Mechanical Safety Check:

Routinely check the condition of your bike before every ride. Make sure no nuts or bolts are loose. Do a

quick visual inspection of the whole bicycle before every ride. Make sure tires are correctly inflated

within the range given on the tyre sidewall. Check the brakes for proper operation.

Your First Ride:

When you buckle on your helmet and go for your first ride, be sure to pick an area away from cars, other

cyclists, obstacles or other hazards to become familiar with the controls, features and performance of

your new electric bike. We suggest you start riding with the electric motor turned off until you are

comfortable. Then, turn the key to turn the motor on.

NSTRUCTIONS