Epson Stylus PHOTO 870 Installation Instruction - Page 4

Browse online or download pdf Installation Instruction for Printer Accessories Epson Stylus PHOTO 870. Epson Stylus PHOTO 870 9 pages. Product support bulletin(s)
Also for Epson Stylus PHOTO 870: Assembly Instructions (5 pages), Cartridges Replacement (2 pages), Product Support Bulletin (6 pages), Product Support Bulletin (1 pages), Supplementary Manual (2 pages), Specifications (2 pages), Product Information (11 pages), Product Support Bulletin (3 pages), Product Support Bulletin (2 pages), Product Support Bulletin (4 pages), Product Support Bulletin (7 pages)

Print Page

(Picture A)

3. Unplug the power connector at the back of the printer (Picture A). This will prevent the

printer from "auto powering down", allowing you have as much time as you need to

complete the installation. Remove the cartridges as the below picture B shown.

Then use a small screwdriver to remove the original cover (Picture C)

(Picture A).

4. Open the black cap of the Reservoir bottle and fill ink into it one by one; please pay

attention to the color sticker on the Reservoir Bottles and fill ink according to the

sticker's color.

1) Pay attention to the direction guide on the Black cap and direction guide on the

Bottles, when the printer is working, make sure the two direction guides are on

the horizontal line to let the air in. In the case of leaking out ink, make them on the

vertical line when the printer stops working.

(Picture B)

(Picture C)