Dillon ED-2000plus User Manual - Page 17

Browse online or download pdf User Manual for Measuring Instruments Dillon ED-2000plus. Dillon ED-2000plus 20 pages. Electronic dynamometer with hr-2000 remote

Print Page

Two special modes can be flagged with the Poll value:

· A Poll value of zero places the remote in Manual Poll mode. The remote

will only poll the instrument when the UNITS key is pressed by the

operator. The ED-2000plus will reply and the HR will display the reading

until the unit is polled again (or until the screen blanks after ten seconds

of non communication). Manual poll mode is designed for situations in

which constant updates are not necessary, to conserve battery life or

reduce airwave clutter.

· A Poll value of 255 places the unit in Monitor mode. The instrument is

completely passive and only ON/OFF or F+ON/OFF keys are functional.

It will need a second HR-2000 operating actively, and the dEStin and

SourcE address must match the active HR-2000 exactly. The passive

HR-2000 will display any traffic FROM the ED-2000 TO the active

HR-2000, as long as it is within receiving distance. Monitor mode is

designed for situations where a second remote is required for the same

ED-2000plus.

7. Press the UNITS key to save the

change and move to the next

item. . .

dEStin is displayed while the key is

pressed then the destination value.

You are now back at the top of the

list of items in address mode.