AEMC instruments CA7027 User Manual - Page 8
Browse online or download pdf User Manual for Measuring Instruments AEMC instruments CA7027. AEMC instruments CA7027 20 pages. Fault mapper pro graphical tdr
Also for AEMC instruments CA7027: User Manual (20 pages)
Print Page
MODEL
ELECTRICAL
Ranges @ Vp=70%
Range Selection
Accuracy*
Resolution
Minimum Cable Length
Sensitivity
Vp (Velocity of Propagation)
Output Pulse
Output Impedance
Output Pulse Width
Scan Rate:
Tone Generator
Voltage Protection
Power Supply
Battery Life
Auto-off
MECHANICAL
Dimensions
Weight (with battery)
Display Resolution
Display Backlight
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Relative Humidity
Altitude
SAFETY
Safety Rating
Protection Degree
Electro-Magnetic Compatibility
CE Approved
*Measurement accuracy of ±1% assumes the instrument setting for velocity of propagation (Vp) of the cable
under test to be accurately set, and homogeneity of the velocity of propagation (Vp) along the cable length.
Accurate positioning of the cursor is also required.
**Specifications are subject to change without notice.
6
Find Quality Products Online at:
CHAPTER 3
SPECIFICATIONS
23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 19000 ft
Approximately 1% of selected range
Minimum 3 pixel return on a fault at 4km on 0.6mm 0, PE, TP
+5V peak to peak into an open circuit
Selectable between 25, 50, 75 & 100Ω
3 ns to 3 ms, Automatic with range
2 scans / second or scan held
Oscillating tone 810Hz to 1110Hz
60 hours continuous scanning
Selectable 1, 2, 3, 5 minutes or disabled
6.5 x 3.5 x 1.5" (165 x 90 x 37mm)
Compliant with current EU directives
GlobalTestSupply
www.
CA7027
Manual range control
±1% of range
1.5 ft (0.5m)
Adjustable from 1% to 99%
250V
AC
4 x 1.5V AA alkaline batteries
12oz (350g)
128 x 64 pixel Graphical LCD
Electroluminescent
14 to 122°F (-10° to 50°C)
-4 to 158°F (-20 to 70°C)
5 to 95% RH non-condensing
6000 ft (2000m)
IEC61010-1; EN60950
IP54
EN61326-1
®
Fault Mapper Pro
Model CA7027
.com