Epson TM-L90 series Manual - Page 13

Browse online or download pdf Manual for Printer Accessories Epson TM-L90 series. Epson TM-L90 series 13 pages. Attaching cover on the power switch
Also for Epson TM-L90 series: Brochure (1 pages), Brochure (2 pages), Product Manual (27 pages), Specifications (2 pages), Specifications (8 pages), Information Manual (5 pages), Specifications (4 pages), User Manual (40 pages), User Manual (17 pages), User Manual (21 pages), User Manual (21 pages), Manufacturing Manual (22 pages), Start Here (2 pages), Start Here (2 pages), Instructions Manual (12 pages), User Manual (36 pages), Development Manual (34 pages), Manual (2 pages)

Print Page
Epson TM-L90 series Manual
How to connect an Epson POS printer with Ethernet Interface
The IP address of the adapter has changed.
The printer is not online in Windows. Check the status of the printer in the Windows Control Panel, the printer
should show status as ready. Tip: try stopping and restarting the
Control Panel.
IP address setting is not correct. Confirm that the IP address assigned by the network is set for the Ethernet
adapter.
Subnet mask setting is not correct. Confirm that the subnet mask assigned by the network is set for the Ethernet
adapter.
The IP address is set redundantly. When the same IP address is used for more than one device in the network,
communication is not possible. Confirm the settings for the other devices. The same default IP address is set for
all Ethernet adapter units as the factory setting. Do not use more than one printer with the Ethernet adapter on the
same network without changing the IP address.
The Epson printer driver has not been installed for the Ethernet adapter and printer in use.
No longer prints
The TM printer is turned off. Turn on the TM printer. Confirm the connection of the power supply unit or the voltage
of the commercial power.
The TM printer is offline. Turn the TM printer online.
The ERROR LED of the TM printer is on or flashing. Remove the error cause.
The printing port of the driver on the computer side is not specified correctly. Confirm the driver setting on the
computer side.
The IP address of the printer has changed. Compare IP settings at the

Printing is slow

There are problems with the computer or network. Printing speed may go down due to problems with the network
system or applications.
More Information
Epson Printers
Need some help? Try our
http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]
Check IP settings.
Epson Interfaces
Epson printer test utility
Home
|
Printers
|
Accessories
|
E-Mail:
Call:
Copyright© 2011
Print Spooler
printer side
Support Information
Service
|
Support
|
About Us
|
Contact
800-253-6407
Beagle Hardware
from the Services applet of the
and computer side.