Motorola CLP series Quick Reference
Browse online or download pdf Quick Reference for Two-Way Radio Motorola CLP series. Motorola CLP series 2 pages. By wsi
Also for Motorola CLP series: Quick Reference Manual (2 pages), Quick Reference (35 pages), Troubleshooting Manual (2 pages), User Manual (48 pages)
Print Page
M
QUICK REFERENCE
CLP SERIES™ PORTABLE RADIO
Power/Battery
Button
Volume
Control (+/-)
Congratulations on your new radio!
Your radio is ready to use after a fully-charged battery has been installed and it is connected to an appropriate audio accessory.
Please refer to
www.motorola.com
CLP Series professional two-way radios operate on radio frequencies that are regulated by the Federal Communications
Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC.
http://www.fcc.gov
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful
interference.
GETTING STARTED
1. INSTALL THE BATTERY
•
Push up the latch at the bottom of the battery door and lift the battery door off the radio.
•
Align the battery contacts with tabs in the battery compartment. Insert the contact side of the battery first, then press the
battery down to secure in place.
•
Put the battery door back on the radio. Push down the latch to lock.
2. CHARGE THE BATTERY
Connect the power supply to the drop-in charging tray or multi-unit charger and insert the radio into the tray. The light on the
charger is red when the radio is charging. It turns to green once the radio is fully charged.
Accessory
Connector
for information on approved accessories.
Menu Button
Smart Status
Glow
Push-to-Talk
(PTT) Button