Motorola EX500 Expert Series User Manual - Page 25
Browse online or download pdf User Manual for Two-Way Radio Motorola EX500 Expert Series. Motorola EX500 Expert Series 38 pages. Motorola two-way radio user guide ex500
Print Page
SCAN
You can monitor several channels in order to
receive any call that is transmitted on any of
these channels. Sixteen different channels can
be programmed into a scan list. Each channel
can share the same scan list or have different
scan lists assigned to them.
Once the radio's scan operation is activated
and the radio detects a call coming through a
channel in its scan list, it switches to that
channel for you to receive the call.
STARTING OR STOPPING A SCAN
OPERATION
The LED Indicator will blink (green) during a
scan operation. It will stop blinking when the
radio switches to a channel.
see page 17
Press the Scan button (
1
a scan operation.
Press the Scan button again to stop the scan
2
operation.
TALKBACK
If the programmable Talkback option is set, you
can respond to any calls received during the
scan operation by pressing the PTT button
before the programmed hang-time ends.
Check with your dealer for details.
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted
calls/noise, you can temporarily remove it from
the scan list by performing a Nuisance
Channel Delete operation.
While the radio is on the Nuisance Channel,
1
press and hold the Scan button (
17
) until you hear a tone.
2
Release the Scan button.
Note:
You cannot perform a Nuisance Chan-
) to start
nel Delete on a priority channel or if
there is only one remaining channel in
the scan list.
see page
23
English