Motorola KEM-ML36801-11B User Manual - Page 2
Browse online or download pdf User Manual for Two-Way Radio Motorola KEM-ML36801-11B. Motorola KEM-ML36801-11B 4 pages. Md series
Print Page
adio size
MD200MR MX-UY-PA-US.qxd:Layout 1 12/11/12 12:53 PM Page 2
wing with point lines
Date: Aug 26,
2011_Rev.1
th point lines
Model: MD200
size
Description: Line Drawing with point lines
Date: Aug 26,
2011_Rev.1
Notes:
Scale 1 : 1 for radio size
Model: MD200
• The battery icon will scroll while the battery pack is being charged.
Description: Line Drawing with point lines
• When moving between hot and cold temperatures, do not charge
Scale 1 : 1 for radio size
the battery until the battery temperature acclimates (usually about
20 minutes).
• For optimal battery life, unplug the charging adaptor within 16 hours.
Do not store the radio while connected to the charger.
Low Battery Alert
In addition to your battery meter showing how much battery power you
have, your radio will beep to alert you to the fact that your batteries are low.
Attaching and Removing the Belt Clip
1. Attach belt clip to pocket or belt strap.
2. Align the belt clip post with the hole in the back of the radio.
3. Gently push until the clip clicks in place.
To Remove
1. Push down on the release tab at the top of the belt clip to
PTT
release the catch.
2. Pull the belt clip away from the back of the radio.
PTT
Turning Your Radio On and Off
1. To turn on, press and hold
until a channel number appears
and the radio beeps.
2. To turn off, press and hold
until the display goes blank.
Setting the Volume
Date: Aug 26,
2011_Rev.1
Press
to increase or
to decrease the volume. The volume level
Model: MD200
VOL
flashes and
Description: Line Drawing with point lines
displays.
Date: Aug 26,
2011_Rev.1
Scale 1 : 1 for radio size
Model: MD200
Description: Line Drawing with point lines
Talking and Listening
Scale 1 : 1 for radio size
To communicate, all radios in your group must be set to the same
channel.
1. To talk, press and hold
.
PTT
2. When you are finished talking, release
.
PTT
For maximum clarity, hold the radio two to three inches away from your
mouth and speak directly into the microphone. Do not cover the
microphone while talking.
Date: Aug 26,
2011_Rev.1
Talk Range
Model: MD200
Your radio is designed to maximize performance and improve
Description: Line Drawing with point lines
Date: Aug 26,
2011_Rev.1
transmission range. Do not use the radios closer than five feet apart.
Scale 1 : 1 for radio size
MENU
Model: MD200
Description: Line Drawing with point lines
Note: This radio does not have Interference Eliminator Codes. To
MENU
Scale 1 : 1 for radio size
communicate with radios that use Interference Eliminator Codes, the
Interference Eliminator Code must be set to 0.
PTT
Monitor Button
PTT
Pressing and holding
for three seconds allows you to listen to the
Date: Aug 26,
2011_Rev.1
Model: MD200
volume level of the radio when you are not receiving. This allows you to
Description: Line Drawing with point lines
adjust the volume, if necessary. You can also press
to check for
Scale 1 : 1 for radio size
activity on the current channel before you talk.
Date: Aug 26,
2011_Rev.1
Model: MD200
Push-to-Talk
PTT
Timeout Timer
Description: Line Drawing with point lines
To prevent accidental transmissions and save battery life, the radio
Scale 1 : 1 for radio size
emits a continuous warning tone and stops transmitting if you press
for 60 continuous seconds.
PTT
Menu Options
PTT
Date: Aug 26,
2011_Rev.1
Selecting the Channel
Model: MD200
Your radio has 22 channels. The channel is the frequency your radio
PTT
Description: Line Drawing with point lines
uses to transmit. (See Channels and Frequencies table below.)
Scale 1 : 1 for radio size
Date: Aug 26,
2011_Rev.1
1. Briefly press and release
. The channel number flashes.
Model: MD200
2. Press
or
to select a channel.
Description: Line Drawing with point lines
Scale 1 : 1 for radio size
3. Press
to confirm or
to continue set up.
PTT
Setting and Transmitting Call Tones
PTT
Your radio can transmit different call tones to other radios in your group
so you can alert them that you want to talk. You have 10 call tones from
which to choose.
PTT
To set a call tone:
1. With the radio on, short press
until the
appears. The current call
tone setting flashes.
2. Press
or
to change and hear the call tone.
3. Press
to set the new call tone or
to continue set up.
PTT
To transmit your call tone to other radios set to the same channel as
your radio, press
.
Note: Setting the call to 0 disables the call tone feature.
PTT
Transmitting a Talk Confirmation Tone
MENU
You can set your radio to transmit a unique tone when you finish
MENU
transmitting. It is like saying "Roger" or "Over" to let others know you
are finished talking.
PTT
1. With the radio on, short press
until
appears. The current
setting On/Off flashes.
2. Press
or
to turn On or Off.
3. Press
to set the talk confirmation tone or
to continue
PTT
set up.
MENU
MENU
Date: Aug 26,
2011_Rev.1
Model: MD200
PTT
Description: Line Drawing with point lines
Keypad Tones
Scale 1 : 1 for radio size
You may enable or disable the speaker key tones. You will hear the key
PTT
tone each time a button is pushed.
Date: Aug 26,
2011_Rev.1
Model: MD200
1. Press
until appears. The current setting On/Off will flash.
Description: Line Drawing with point lines
2. Press either
or
to turn On or Off.
Scale 1 : 1 for radio size
3. Press
PTT
to confirm or
to continue set up.
Line Drawing best fitting for UG
Date: Aug 26,
2011_Rev.1
Note: When the key tone feature is off, the following are not disabled:
Model: MD200
• Transmit timeout alert tone
Description: Line Drawing with point lines
Line Drawing best fitting for UG
Scale 1 : 1 for radio size
• Power-down alert tone
• Low battery alert tone
• The transmitted talk confirmation tone
PTT
Auto Power Off
Your radio will save power by automatically turning itself off if unused
after a predetermined amount of time.
1. Activate this setting by short pressing
until
displays. The current
setting (0, 30, 60, 90) will flash.
2. Press
or
to set the time to 30 minutes, 60 minutes or
PTT
PTT
90 minutes.
3. When you exit the Menu mode, the setting timer will begin if you are
PTT
not using the radio.
MENU
4. The screen shows
.
MENU
5. Press
PTT
to confirm or
to continue set up.
PTT
Special Features
PTT
Keypad Lock
To avoid accidentally changing your radio settings you can lock your
keypad:
1. Press
and hold until
displays.
2. When in lock mode, you can turn the radio on and off, receive,
transmit, send a call tone, and monitor channels. All other functions
are locked.
MENU
To unlock the radio, press and hold
for a few seconds until
no
Line Drawing best fitting for UG
MENU
longer displays.
Scanning Channels
Use scan to search the 22 channels for transmissions from unknown
parties, to find someone in your group who has accidentally changed
channels, or to quickly find unused channels for your own use.
To start Scanning:
1. Briefly press the
key. The scan
will appear in the display, and the
radio will begin to scroll through the channel.
2. When the radio detects channel activity matching the channel, it
stops scrolling and you can hear the transmission.
PTT
3. To respond and talk to the person transmitting, press
within five
seconds after the end of the transmission.
Line Drawing best fitting for UG
4. The radio will resume scrolling through the channels five seconds
after the end of any received activity.
Line Drawing best fitting for UG
5. To stop scanning, briefly press the
key.
Scanning Notes
1. If you press
while the radio is scrolling through inactive
channels, the transmission will be on the "home channel". Scanning
will resume five seconds after the end of your transmission. You may
press the
key to stop scanning at any time.
Line Drawing best fitting for UG
2. If the radio stops on an undesired transmission, you may
immediately resume the scan by briefly pressing
or
.
PTT
Line Drawing best fitting for UG
3. If the radio repeatedly stops on an undesired transmission, you may
temporarily remove that channel from the scan list by pressing and
PTT
holding
or
for three seconds. You may remove more than one
channel in this way.
4. To restore the removed channel(s) to the scan list, turn the radio off
and then back on, or exit and re-enter the scanning mode by
pressing
.
5. You cannot remove the home channel from the scan list.
PTT
Line Drawing best fitting for UG
Use With Accessories
You can transmit more reliably with the use of optional PTT headset
PTT
accessories. A PTT headset allows privacy to others around you while
Line Drawing best fitting for UG
listening.
Many accessories (sold separately) are available for your radio. For
more information, visit our Web site at www.motorolasolutions.com or
shop.giantintl.com.
1. Turn the radio off and plug the PTT accessory into the accessory
jack.
2. Turn the radio on. You may now press the PTT on the accessory
microphone instead of the radio.
PTT
3. Adjust the volume appropriately by pressing
. Lower the volume
before placing the accessory on your head or in your ear.
Note: The MD Series does not have VOX capabilities, and is only
PTT
compatible with PTT headset accessories.
MENU
PTT
Line Drawing best fitting for UG
PTT
Warranty
Consumer Two-Way Radio Products and Accessories purchased in
Products and Accessories as
Mexico, Uruguay, Panama, USA, and Canada.
defined above, unless otherwise
provided for below.
Line Drawing best fitting for UG
What Does this Warranty Cover?
Subject to the exclusions contained to the right, Giant International
1. Consumer Two-Way Radio
Ltd. warrants the Motorola branded consumer two-way radios that
Line Drawing best fitting for UG
operate via Family Radio Service or General Mobile Radio Service
Line Drawing best fitting for UG
PTT
that it manufactures ("Products") and the Motorola branded or
certified accessories sold for use with these Products that it
Line Drawing best fitting for UG
manufactures ("Accessories") to be free from defects in materials
2. Products and Accessories
and workmanship under normal consumer usage for the period(s)
Line Drawing best fitting for UG
Line Drawing best fitting for UG
outlined below. This limited warranty is a consumer's exclusive
remedy, and applies as follows to new Motorola branded Products
and Accessories manufactured by Giant International Ltd., and
PTT
purchased by consumers in Mexico, Uruguay, Panama, USA, and
Canada which are accompanied by this written warranty:
PTT
PTT
Line Drawing best fitting for UG
PTT
PTT
PTT
Who is covered?
This warranty extends only to the first consumer purchaser, and is
not transferable.
What will GIANT INTERNATIONAL LTD. do?
GIANT INTERNATIONAL LTD., at its option, will at no charge repair,
PTT
replace or refund the purchase price of any Products or
Accessories that does not conform to this warranty. We may use
functionally equivalent reconditioned/ refurbished/ pre-owned or
new Products, Accessories or parts.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
For Accessories, please call the telephone number designated
above for the product with which they are used.
You will receive instructions on how to ship the Products or
Accessories at your expense, to a GIANT INTERNATIONAL LTD.
Authorized Repair Center. To obtain service, you must include: (a) a
copy of your receipt, bill of sale or other comparable proof of
purchase; (b) a written description of the problem; (c) the name of
your service provider, if applicable; (d) the name and location of the
installation facility (if applicable) and, most importantly; (e) your
address and telephone number.
Patent and Copyright Information
Manufactured, distributed or sold by Giant International Ltd., official
licensee for this product. MOTOROLA, MOTOROLA SOLUTIONS and
the Stylized M Logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under license. All
other trademarks are the property of their respective owners. ©2012
Motorola Solutions, Inc. All rights reserved.
Products Covered
Length of Coverage
One (1) year from the date of
Normal Wear and Tear. Periodic maintenance, repair and
purchase by the first consumer
replacement of parts due to normal wear and tear are excluded from
purchaser of the product unless
coverage.
otherwise provided for below.
Batteries. Only batteries whose fully charged capacity falls below
1. Ninety (90) days from the
80% of their rated capacity and batteries that leak are covered by
Accessories.
date of purchase by the first
this limited warranty.
consumer purchaser of the
Abuse & Misuse. Defects or damage that result from: (a) improper
product.
operation, storage, misuse or abuse, accident or neglect, such as
2. The balance of the original
physical damage (cracks, scratches, etc.) to the surface of the
that are Repaired or
warranty or for ninety (90)
product resulting from misuse; (b) contact with liquid, water, rain,
Replaced.
days from the date returned
extreme humidity or heavy perspiration, sand, dirt or the like, extreme
to the consumer, whichever
heat, or food; (c) use of the Products or Accessories for commercial
is longer.
purposes or subjecting the Product or Accessory to abnormal usage
or conditions; or (d) other acts which are not the fault of Motorola
Solutions, Inc. or Giant International Ltd., are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or
damage that result from the use of Non-Motorola branded or
certified Products, Accessories, or other peripheral equipment are
excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting
from service, testing, adjustment, installation, maintenance,
alteration, or modification in any way by someone other than
Motorola Solutions, Inc., Giant International Ltd. or its authorized
service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers
or date tags that have been removed, altered or obliterated; (b)
broken seals or that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or non-Motorola
branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of
Products or Accessories due to any communication service or
signal you may subscribe to or use with the Products or Accessories
is excluded from coverage.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL
MOTOROLA SOLUTIONS. INC. OR GIANT INTERNATIONAL LTD. BE
LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE
OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY
USA and Canada
Mexico
KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,
1-800-638-5119
01-800-021-0000
LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT
OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE
THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE
Uruguay
Panama
DAMAGES MAY BE DISCLAIMED BY LAW.
00-04-01-78-70-11
507-340-0293
Some states and jurisdictions do not allow the limitation or exclusion
of incidental or consequential damages, or limitation on the length of
an implied warranty, so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and you
may also have other rights that vary from state to state or from one
jurisdiction to another.
Exclusions
MD Series