Motorola BLINK1.1-W User Manual - Page 7

Browse online or download pdf User Manual for Baby Monitor Motorola BLINK1.1-W. Motorola BLINK1.1-W 26 pages. Wi-fi video camera

Print Page

•

Select CREATE ACCOUNT.

•

Enter a user name, a password, an e-mail address and

select SIGN UP.

•

Agree with the terms of use and select I AGREE.

•

Tap NEXT STEP.

•

Follow the on screen checklist to ensure that your camera

is power connected and tap NEXT.

•

Select the camera from the list.

If you cannot find the camera ID on the list, please reset the

camera with the following procedure:

1. Switch the ON/OFF switch to ON.

2. Press and hold the RESET button on the underside of

the camera for 5 seconds, until you hear a beep sound.

3. Release the RESET button and wait for the camera to

complete the internal reset procedure.

4. After about 60 seconds you will hear two short beeps

and the green LED starts blinking.

Getting started: Working with devices for Android

BLINK1.1_USA_V1_2013_08_16.indd 12-13

•

Wait for up to five minutes. If the connection process takes

longer, tap CANCEL and try again.

•

Ensure that you have a good Wi-Fi network connection.

•

Once your camera is installed, you can rename it.

•

Tap DONE.

•

Tap START MONITOR to show the camera view.

•

Tap VIEW to show the camera view and the controls.

Note:

The Camera SSID is printed on the label on the bottom of the

Camera, for example: ID: Camera-1006fa

On your devices for Android

3.4 User Account and Camera Setup:

Working with iPhone

•

Install the application "Monitor Everywhere" from the

App Store

. Note: If you can't find the application, then use

™

Getting started: Working with iPhone

™

you will see: Camera-1006fa.

/iPad

16/8/13 2:08 PM