Motorola BP36S User Manual - Page 11

Browse online or download pdf User Manual for Baby Monitor Motorola BP36S. Motorola BP36S 29 pages. Motorola bp36s; mbp36s-2; mbp36s-3; mbp36s-4 digital video baby monitor

Print Page

2. During power ON, when adapter is plugged in, the battery icon on screen's

top right corner will show that the battery is charging. The Blue LED at the

top left corner light up indicates adapter is plugged in.

2.4

Registration (Pairing)

The Baby monitor is pre-registered to your Parent Unit. You do not need to

To re-register your Baby Unit, or register a new Baby Unit, follow the procedure

below:

1. Press the

button of the parent unit and the menu bar will pop up.

2. Press the

LEFT button or

del/add/view/scan

the

3. Press the

UP button or

button to confirm.

cam 1

cam 2

button to select the desired CAM and press the

searching for a camera unit. The green audio level LED will flash rapidly

while searching.

5. Press the

6. Press and hold the PAIR button underneath the baby unit until the parent

unit finds the camera, beeps and the video from the camera appears.

NOTE

If a particular Baby Unit was registered previously, registering this current

Baby Unit again will overwrite the old registration.

2.5

View Video Through TV

Connect a suitable AV cable into the AV OUT socket on the side of the Parent

Unit and into the AV input of the TV. Scroll to select

through the AV inputs on the TV menu until the Baby monitor picture is visible.

AV cable is an optional accessory, which is to be purchased separately.

NOTE

The Monitor's power button must be turned ON and CAM pre-selected before

connecting the AV cable. Once the AV cable is connected, the Monitor's

controls cannot be activated.

You can hear also your baby in mono mode by connecting the 3.5mm plug

wired headset to the AV OUT socket.

Getting Started

menu will pop up.

DOWN button to select

cam 3

cam 4

will pop up, press the

button to confirm.

RIGHT button until

is highlighted, and

add

, and press the OK

UP button or

DOWN

button to start

on the Parent unit. Scroll