Epson Powerspan Product Information Manual - Page 11
Browse online or download pdf Product Information Manual for Desktop Epson Powerspan. Epson Powerspan 13 pages. Product information guide
Also for Epson Powerspan: Product Information Manual (12 pages), Specifications (10 pages)
Print Page
Power-on diagnostic and boot error messages (continued)
number
number Message
003
Hard drtve read failure
004
No boot sector on hard
Error Tone Codes
If power-on diagnostic tests detect an error but cannot display
an error message, the computer sounds an error tone code.
The tone code is a distinct pattern of beeps that identifies the
error, such as one beep-two beeps-one beep. If the error is
serious (fatal) the computer locks up, but if the error is not
serious (non-fatal) you can continue using your computer.
The tables below list the fatal and non-fatal error codes.
Error tone codes for
errors
Error tons code
l-l-3
l-l-4
ROM BIOS checksum failure
1-2-1
Programmable interval timer failure
l-2-2
DMA Initialization failure
l-2-3
DMA page register write/read failure
1-3-1
RAM refresh verification failure
l-3-3
First 84KB RAM chip or data line failure (multi-bit)
l-3-4
First 84KB RAM odd/even logic failure
l-4-1
First 84KB RAM address line failure
l-4-2
First 84KB FtAM parfty test in progress failure
2-l-l
2-l-2
First 84KB RAM failure-bit 1
2-l-3
2-l-4
First 84KB RAM fatlure-Mt 3
First 84KB RAM failure-bit 4
2-2-1
First 84KB RAM failurg-bit 5
2-2-2
2-2-3
2-2-4
2-3-l
First 84KB RAM failure-bit 8
2-3-2
2-3-3
3-l-4
3-2-4
The hard disk drive may have
failed; check your drive type
by running SETUP or the
ECU; check all cabte
connections; contact your
dealer If the problem persists
The hard disk drive Is not
formatted as a bootable disk;
necessary; contact your dealer
If the problem persists
9/1/93
Error tone codes for non#al errors
Error tone code
Screen memory test failure
Screen inftlalization test failure
Screen retrace test failure
Hard Disk Drive Types
The following table lists the types of hard disk drives you can
use in the computer. Check this table and the documentation
supplied with your hard disk to find the correct number for
the type of hard disk drive(s) installed in your computer. You
need to enter this number when you set the hard disk drive
configuration in the SETUP program.
Hard disk drive types
Hd
01
4
-1
I
1512
1512
-1
08
07
-1
09
-1
I
18
19
1512
9
I-1
20
21
1988
10
I-1
23
838
18
-1
24
830
10
-1
1751
I-1
985
5
-1
33
34
965
10
-1
35
1024
9
-1
EPSON PowerSpan
Sect
17
20MB
888
I-
I User-definable
I
I
82MB
17
48MB
17
17
88MB
17
17
I-
I Unused
837
830
023
Unused
40MB
1
17
80MB
1
17
17
78MB
1024
Epson PowerSpan-11