Motorola C1004LX Manual

Browse online or download pdf Manual for Cordless Telephone Motorola C1004LX. Motorola C1004LX 2 pages. C100 series
Also for Motorola C1004LX: Manual (2 pages)

Print Page
Motorola C1004LX Manual
Digital Cordless Telephone
Manufactured, distributed or sold by
licensee for this product. MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other trademarks are the property
of their respective owners. © 2014 Motorola Mobility LLC. All rights
Models: C1001LX, C1002LX, C1003LX and C1004LX
reserved.
Version 15 (EN-US)
After charging your handset for the first time, subsequent charging time
is about 6–8 hours a day. The battery and handset may become warm
during charging. This is normal.
1
All talk and standby times are approximate and depend on features
selected and usage pattern.
Date and time
If you have subscribed to a Caller ID Service and the Auto Clock is set
to on, the date and time will set automatically for all handsets when you
2.
If you are charging the battery for the first time, place the handset
receive your first call.
on the charger to charge for at least 24 hours continuously.
If you do not have a Caller ID service, you can set the date and time
manually, see section "5.3. Date and Time".
3.
When the handset is fully charged,
icon will appear steady on
the display. The display will show
Handset
and handset number (e.g.
Your C100xLX is now ready for use.
2) to indicate that it is registered to the base.
2. Getting to know your phone
IMPORTANT
Underside of your base
Warning! Use only the approved rechargeable Ni-MH battery pack (AAA
2.4v 300mAh Ni-MH rechargeable battery) supplied with your C100xLX.
E
BATTERY LOW WARNING
If
icon flashes on the display and you hear a warning beep every 2
minutes during a call, you will need to recharge the handset before you
f
can resume use.
When charging,
icon will scroll on the display.
BATTERY PERFORMANCE
In ideal conditions, a fully charged battery should give up to 10 hours of
talk time or up to 200 hours standby time on a single charge.
1
Note that new batteries do not reach their full capacity until it has been
put to normal use for several days.
To keep your batteries down at least one time per week will help prolong
battery life.
Running the batteries right down at least once a week will help them last
A
Page
In standby mode, press to ring the handset(s).
as long as possible.
Press and hold to enter registration mode when registering
The charge capacity of the rechargeable battery will reduce with time
handsets.
as it wears out, giving the handset less talk / standby time. Eventually it
will need to be replaced.
*
3.5
Intercom
2.
If more than 2 handsets are registered to the base press and hold
and scroll
3.5.1
Make an internal call
If more than one handset is registered to the base, internal calls can be
3.
When the other handset answers, press
e
made between two handsets.
icon flashes and the display shows the
callers to begin the conference call.
*
handset number you are calling.
4.
Press
1.
If only 2 handsets are registered to the base, press
and the other
3.6
Hands-free
*
handset rings automatically.
To talk to the caller without holding the handset or for other people in
t
2.
If more than 2 handset are registered to the base press
and
the room to listen to the conversation over the loudspeaker simply use
scroll
d
to the handset that is to be called and press
.
the hands-free function.
3.5.2
Receive an internal call
3.6.1
Make a hands-free call
When you receive an internal call,
icon flashes and the handset
e
1.
Dial the number and then press
t
number that is calling you is displayed.
2.
Press
1.
Press
to make an internal call.
h
3.6.2
Answer a call hands-free
3.5.3
Transfer a call
Press
to answer the call in hands-free.
You can transfer an external call to another handset registered to the
h
NOTE
base.
Press
to switch the call between the earpiece and the loudspeaker.
*
During an external call:
During a hands-free call, press
1.
If only 2 handsets are registered to the base, press and hold
and
3.7
Redial
the other handset rings automatically.
*
The last 10 entries dialed are stored in the redial list.
2.
If more than 2 handsets are registered to the base press and hold
m
d
e
3.7.1
View or dial an entry
and scroll
to the handset that is to be called and press
.
r
1.
Press
3.
When the other handset answers, press
to complete the transfer.
t
u
2.
Scroll
NOTE
3.
Press
Your external call resumes automatically after 1 minute if there is no
answer.
3.7.2
Copy a Redial list number to the phonebook
r
3.5.4
3-way conference call
1.
Press
You can hold a 3-way conference call between 2 internal callers and 1
2.
Scroll
u
m
external caller.
3.
Press
*
m
During a call with an external caller:
4.
Press
1.
If only 2 handsets are registered to the base, press and hold
and
5.
Enter the name and press
the other handset rings automatically.
6.
Edit the number if necessary, then press
Welcome...
to your new Motorola C100xLX Digital Cordless Telephone!
•
All handsets are completely cordless and easy to locate with paging system.
•
Bright backlit display.
•
Speakerphone for hands-free conversations.
•
50 Name and Number phonebook.
•
Caller ID shows you who's calling and shows the details of the last 20
callers in a Calls list.
1
•
Redial up to 10 of the last numbers called.
•
Register up to 4 handsets to a single base.
•
Make internal calls and transfer external calls between handsets.
•
Choose from 10 different ringtones.
Please note that this equipment is not designed for making
emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
Need help?
If you have any problems setting up or your using your C100xLX
Digital Cordless Telephone, please contact Customer Service at
Binatone
Technologies Ltd., official
1-888-331-3383. Alternatively, you may find the answer in the 'Help'
section at the back of this guide.
1
You must subscribe to your network provider's Caller ID service for
this feature to work. A subscription fee may apply.
Please note that this equipment is not designed for making
emergency telephone calls when power fails. Alternative
arrangements should be made for access to emergency services.
Overview of your handset
Phonebook / Scroll Up /
Volume down
Display
Open the phonebook.
Scroll up through lists and
menus.
Increase the earpiece volume.
Menu / OK
Enter the main menu.
Select the option
displayed on screen.
Con rm menu option.
Talk / Flash
Make or answer a call.
Use flash (F) functions.
* / Intercom
Press and hold to make
an internal call.
Dial a *.
A
Hands-free
Activate and deactivate
hands-free during a call.
IMPORTANT
Hands-free activation can
suddenly increase the
volume in the earpiece to
a very high level. Make
sure the handset is not
too close to your ear.
Redial
In standby mode, press
to open the redial list.
Microphone
3.7.3
Delete an entry
m
r
d
to the handset that is to join the call and press
.
1.
Press
to open the Redial list.
m
to connect all three
2.
Scroll
u
or
d
to the entry you want. Press
d
3.
Scroll
to
Delete
and press
m
to end the call.
4.
Press
to confirm or
3.7.4
Delete the entire Redial list
r
1.
Press
to open the Redial list.
m
2.
Press
. Scroll
d
m
3.
Press
to confirm or
h
.
3.8
Lock / unlock the keypad
When the keypad is locked, you can still answer incoming calls and
to end the call.
operate the handset normally during a call. When the call ends, the
keypad lock resumes in place.
NOTE
When the keypad is locked, you can still answer incoming calls and
operate the handset normally during a call. When the call ends, the
0
u
d
or
to adjust the volume.
keypad lock resumes in place.
1.
Press and hold
.
is displayed.
Keys locked
2.
To unlock the keypad, press and hold
to open the Redial list.
3.9
Paging / Find handset
e
p
d
or
to the entry you want.
Paging is a useful way to find lost handsets.
p
to dial the displayed entry or press
to return to standby.
1.
Press
on the base. All handsets ring.
2.
Press
again to cancel the paging call or press any key on the
handset to stop the paging call.
to open the Redial list.
or
d
to the entry you want.
. The display shows
Save number
.
again. The display shows
.
Enter name
m
. The number is displayed.
m
to save.
This User Guide provides you with all the information you need to
get the most from your phone.
Before you make your first call you will need to set up your phone.
Follow the simple instructions in 'Getting Started', on the next
few pages.
IMPORTANT
Only use the telephone line cord and power adapter supplied.
Got everything?
•
C100xLX base & cordless handset
•
1 x rechargeable Ni-MH battery pack
•
Power adapter for the base
•
Telephone line cord
•
User Guide
•
Quick Start Guide
If you have purchased a C100xLX multiple pack you will also have
the following items:
•
Cordless handset & charger
•
Rechargeable Ni-MH battery pack
•
Power adapter for the charger
•
Telephone line cord
Handset display
Display icons
Call list / Scroll Down /
Volume down
Earpiece
Press to enter the Calls list.
Scroll down through lists
and settings.
During a call, press to
decrease earpiece volume.
When the phone is ringing,
press to decrease the
handset ringer volume.
Clear / Back
Delete characters on screen
Indicates signal strength.
when entering names and
Flashes when the handset is not registered to the base or if you are
numbers.
Go back to previous menu
out of range.
level is displayed on the
Indicates a missed call.
screen.
Steady when making an outgoing call.
End call / Switch handset
Flashes to indicate an incoming or internal call.
on/o
End a call.
Indicates an incoming call when viewing the calls list.
When in a menu, go back
to standby mode.
Indicates an outgoing call when viewing the calls list.
Press and hold to switch
handset o (when in
Hands-free is on.
standby) or on.
Handset ringer is off.
Pause / # / Change case
Press and hold to enter a
Indicates new voicemail messages received .
pause (P) when pre-dialling
Off when there is no voicemail messages.
or storing numbers.
Dial a #.
pq Indicates you can scroll through a list or adjust the volume in talk mode.
When entering letters /
f
u
Indicates more text after the displayed information.
editing, press and hold to
change the case from Abc
H
to abc or ABC mode.
Battery is fully charged.
Mute
When viewing the Calls
Mute / unmute the
l
List press to change the
Battery is partially charged.
microphone during a
CID format.
call.
E
Battery is running low.
Flashes when battery is almost fully discharged.
4. Phonebook
The C100xLX handset phonebook can store up to 50 names and
m
.
numbers.
m
b
. The display shows
Confirm?
.
Names can be up to 14 characters long and numbers up to 24 digits.
to cancel.
4.1
Store a name and number
m
1.
Press
.
is displayed.
Phonebook
m
2.
Press
.
is displayed.
New Entry
m
b
to
. The display shows
.
Delete all
Confirm?
3.
Press
.
is displayed.
Enter Name
m
to cancel.
4.
Enter a name and press
.
m
e
5.
Enter a number. Press
to save.
6.
Press
to return to standby.
ENTERING NAMES
Use the keypad letters to enter names, e.g. to store TOM:
8
Press
once to enter T.
6
Press
three times to enter O.
6
Press
once to enter M.
b
WRITING TIPS
0
Press
to delete the last character or digit.
again.
0
Press
u
or
d
to move between characters.
Press
to insert a space.
4.2
View or dial an entry
1.
Press
u
.
2.
Scroll
u
or
d
to the entry you want.
OR
Enter the first letter of the name to search alphabetically.
The first name that starts with this letter or the nearest letter in the
alphabet will be
t
e
displayed. Scroll
u
or
d
to the entry you want.
3.
Press
to dial or
to return to standby.
1. Getting started
IMPORTANT
Do not place your C100xLX in the bathroom or other humid areas.
Location
You need to place your C100xLX base within 6 feet of an electrical outlet
and a telephone wall socket to provide the power to supply the device
and to connect to telephone service.
Make sure it is at least 3 feet away from other electrical appliances
to avoid interference. Your C100xLX works by sending radio signals
between the handset and base. The strength of the signal depends on
where you place the base. Putting it as high as possible ensures the best
signal.
HANDSET RANGE
The unit has a range of up to 650 feet outdoors when there is a clear
line of sight between the base and handset. Any obstruction between
the base and handset will reduce the range significantly. With the
base indoors and the handset either indoors or outdoors, the range will
normally be up to 100 feet. Thick concrete and stone walls can severely
affect the range.
SIGNAL STRENGTH
The
icon on your handset indicates that you are within range of the
base. When out of range of the base, the
icon disappears. If you are
on a call, you will hear a warning beep.
If you are on a call, the line will hang up if the handset moves out
of range of the base. Move back within range. The handset will
automatically re-connect to the base.
Setting up
IMPORTANT
Use only the power adapter and telephone line cord supplied with the
product.
1
This feature is dependent on your Network Service provider supporting
the service. A subscription fee may be payable.
Navigating the menus
Each menu has a list of options, which can be seen in detail on the menu
map on the below list.
When the handset is switched on and in standby mode:
m
1.
Press
to open the main menu.
2.
Then use
u
or
d
buttons to scroll through the available options.
m
b
e
3.
Press
to select an option. To return to the previous menu level,
press
. To exit the menu and return to standby, press
.
NOTE
If you do not press a button on the handset for 30 seconds the display will
automatically return to standby. It will also return to standby when the
handset is placed on the base or charger.
Menu map
Phonebook
Ring tones
Area code
View
Key tone
Flash time
Add new
Docking tone
Dial mode
Edit
Battery tone
Auto clock
Delete
1
Phone name
Register
Delete all
Date & time
Unregister
1
Phone setup
Language
Reset
Sounds
Services
1
Ring volume
Call list type
1
Only available when an phonebook entry is already stored.
4.3
Edit a name and number
m
1.
Press
twice. The display shows
.
View
m
d
2.
Scroll
to
Edit
and press
.
u
d
3.
Scroll
or
to the entry you want to edit, or search alphabetically
m
b
and press
. The existing name is displayed.
4.
Press
to delete the name if required, then enter the new name
m
b
and press
. The existing number is displayed.
5.
Press
to delete the number if required, then enter the new
m
number and press
to save.
4.4
Delete an entry
m
1.
Press
twice. The display shows
.
View
m
d
2.
Scroll
to
Delete
and press
.
u
d
3.
Scroll
or
to the entry you want to delete, or search
m
b
alphabetically and press
. The display shows
.
Confirm?
m
4.
Press
to confirm or
to cancel.
4.5
Delete all entries
m
1.
Press
twice. The display shows
.
View
m
2.
Scroll
d
to
and press
.
Delete all
b
3.
The display shows
Confirm?
.
m
4.
Press
to confirm or
to cancel.
5. Personal settings
5.1
Sounds
5.1.1
Ring volume
You can adjust the ringer volume and set different volume levels. Choose
from 5 volume levels or Off.
m
1.
Press
, scroll
d
to
Phone setup.
m
2.
Press
. The display shows
.
Sounds
m
3.
Press
. The display shows
Ring volume
.
Connecting the base
1.
Plug the telephone line cord into the socket marked
on the rear
of the base.
2.
Plug the power adapter into the socket marked
on the rear of
the base and plug the other end into the electrical outlet.
Charging the handset
3.
If you are charging the battery for the first time, place the handset
on the base to charge for at least 24 hours continuously.
4.
When the handset is fully charged,
icon will appear steady
on the display. Plug the other end of the telephone line cord
(make sure that one end is already plugged into the base) into the
telephone wall socket.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this
process for all the handsets and chargers.
1.
Plug the power adapter into the socket marked
on the rear of
the charger and plug the other end into an electrical outlet.
3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls.
The call timer will display after the first 10 seconds of your call. When the
call ends, the total duration of your talk time is shown for 3 seconds.
e
3.1
Switch the handset on / off
Press and hold
to switch the handset on or off.
3.2
Calls
t
3.2.1
Make a call
1.
Press
.
2.
Dialing a telephone number.
b
3.2.2
Pre-dial
1.
Use the keypad to dial a number, if you make a mistake press
to
t
delete the last digit.
2.
Press
to dial.
e
3.2.3
End a call
Press
, or place the handset back on the base or charger.
3.2.4
Answer a call
When you receive an external call, the phone rings and
icon flashes
t
on the display.
1.
Press
to answer the call.
3.3
Adjust the earpiece volume
During a call, press
u
or
d
to increase or decrease the volume. There
are 5 levels to choose from.
3.4
Mute
You can mute your handset so that you can talk to someone nearby
M
without your caller hearing.
1.
During a call, press
. The display shows
and your caller
Mute on
M
cannot hear you.
2.
Press
again to resume your call.
m
b
4.
Press
, scroll
u
or
d
to select the volume (1 -5 or OFF) .
m
5.
Press
to confirm or
to return to the previous menu.
5.1.2
Ringer tones
You can set different ringer tones for your internal and external calls.
Choose from 10 different ringer tones.
NOTE
You will hear a sample ring as you scroll to each ring tone.
m
1.
Press
, scroll
d
to
Phone setup.
m
2.
Press
. The display shows
.
Sounds
m
d
3.
Press
. Scroll
to
.
Ring tones
m
b
4.
Press
, scroll
u
or
d
to select the tone (1 -10) .
m
5.
Press
to confirm or
to return to the previous menu.
5.1.3
Key tones on/off
When you press a button on the handset keypad, you will hear a beep.
You can switch these beeps on or off.
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows
.
Sounds
m
3.
Press
. Scroll
d
to
.
Key tone
m
m
4.
Press
,
u
or
d
to select
or
and press
to confirm.
On
Off
5.1.4
Docking tone on /off
When you replace the handset in the base you will hear a double beep.
You can switch this beep on or off.
m
d
1.
Press
, scroll
to
Phone setup.
m
2.
Press
. The display shows
.
Sounds
m
3.
Press
. Scroll
d
to
.
Docking tone
m
m
u
d
4.
Press
,
or
to select
On
or
Off
and press
to confirm.