Motorola C1011LX Manual - Page 2
Browse online or download pdf Manual for Cordless Telephone Motorola C1011LX. Motorola C1011LX 2 pages. Digital cordless telephone with
answering machine
Also for Motorola C1011LX: User Manual (2 pages)
Print Page6.4
Dial mode
d
2.
Scroll
Your C101xLX is set to tone dialing. You should only need to change this if connected
to an older type of PABX / PBX which requires pulse dialing.
3.
Enter the 4 digit master PIN and press
m
m
d
Display shows the first registered handset number.
1.
Press
, scroll
to
Services
and press
.
m
d
u
4.
Scroll
2.
Scroll
to
Dial mode
and press
.
m
u
d
Unregistered
3.
Press
or
to select
Tone
or
Pulse
and press
to confirm.
6.7
Restore default settings
6.5
Switch Auto clock on / off
You can restore your C101xLX to its default (original) settings.
If you have subscribed to a Caller ID Service, the date and time will be set on all your
All the handsets that are registered to the base will be retained.
handsets whenever a call is received. This feature can be set to On or Off.
m
m
IMPORTANT
1.
Press
, scroll to
Services
and press
.
m
Resetting your phone to its default setting will delete all entries in the Phonebook and
d
2.
Scroll
to
Auto clock
and press
.
m
Calls list. All handset and base settings will also be reset.
m
d
3.
Scroll
to
On
or
Off
then press
to confirm.
1.
Press
6.6
Registration
d
2.
Scroll
Up to 4 handsets can be registered to one base station. Additional handsets must be
3.
Confirm?
registered to the base before you can use them.
•
The instructions described below apply specifically to your C101xLX handset. If
6.8
Default settings
you wish to register another manufacturer's handset, the instructions may vary. In
this case, please refer to the manufacturer of the additional handset.
Handset name
•
The Master PIN is required before you can register or unregister handsets. The
Low battery beeps
PIN is 0000.
Docking tone
6.6.1
Register a handset
Key tone
Ringer melody
p
At the base:
Ringer volume
1.
Press and hold the
on the base until the base beeps. You have 120 seconds in
Ear volume
which to register a handset.
Phonebook
Calls list
At the handset:
m
7. Caller ID and the Calls list
1.
If the handset is not already registered to a base, press
.
m
d
2.
Or if the handset is already registered to a base, press
scroll
to
Services
IMPORTANT
m
m
d
To use Caller ID, you must first subscribe to the service from your network provider. A
and press
. Scroll
to
Register
and press
.
m
subscription fee may be applicable.
3.
When the display shows PIN, enter the base PIN and press
.
To ensure that the caller's name is displayed, make sure you have stored the full
When the handset registers with the base, it is assigned a handset number.
telephone number, including the area code in the phonebook. Notation if area code is
6.6.2
Un-Register a handset
stored in phone it will not display full number**
Use one handset to delete another. You cannot delete the handset that you are using.
If the call is is blocked,
m
m
If the number is unavailable,
d
1.
Press
, scroll
to
Services
and press
.
If the call is from the operator,
8.6
Ring delay
8.9
Answering machine language
Select the duration of rings before your answering machine picks up the call. Choose
You can change the answering machine voice prompts and default OGM language.
m
from 3-8 Rings or In Toll Saver mode:
1.
Press
•
If you have new messages your phone answers after 3 Rings.
d
2.
Scroll
•
If there are no new messages it will answer after 5 Rings. So you have the option
u
3.
Scroll
to hang up, saving the time and cost of a call.
•
If the memory is full, it will automatically revert to Answer Only mode.
m
m
9. Help
d
1.
Press
, scroll to
Answ. Machine
and press
.
m
No dial tone
2.
Scroll to
Ring delay
and press
. The handset will display the current setting.
m
u
d
•
Use only the telephone line cord supplied.
3.
Use
or
to select the number of rings required and press
to confirm.
•
Check that the telephone line cord is connected properly.
8.7
Remote access
•
Check that the power adapter is connected and you have a working outlet.
You can operate your answering machine from any touch tone telephone by calling
No display
your C101xLX product and entering a 4 digit security PIN code.
•
Check that the battery is inserted correctly and fully charged. Use only the
1.
Dial your telephone number. When you hear your outgoing message, press #.
approved rechargeable battery supplied.
2.
Enter your 4-digit PIN (default setting 0000) you will hear a confirmation beep.
•
Check that the handset is switched on. Press and hold
Use the keypad to operate the C101xLX answering machine.
•
Reset the base by removing the battery and disconnecting the power adapter.
Wait for around 15 seconds before connecting it again. Allow up to one minute
Press 1 for previous message
Press 7 to turn On the answering
for the handset and base to synchronize.
machine
icon flashes
Press 2 to play messages
Press 8 to stop message playback
Press 3 to play the next message
Press 9 to turn Off the answering
•
Handset is out of range. Move closer to the base.
machine
•
Make sure that the handset is registered to the base.
Press 6 to delete the current message
•
Check that the power adapter is connected and you have a working outlet.
8.8
Remote access on/off and change remote PIN
Keypad is not responding
m
m
u
d
•
Check that the keypad lock is not on.
1.
Press
, scroll
or
to
Answ. Machine
and press
.
m
icon is not scrolling during charge
d
2.
Scroll
to
Remote access
and press
.
•
Adjust the handset slightly on the base.
u
d
3.
Scroll
or
to select Activated,
Deactivated
or
Change
PIN.
m
•
Clean the charging contacts with a cloth moistened with alcohol.
m
4.
Press
to confirm.
•
Check that the power adapter is connected and you have a working outlet.
If you choose
Change PIN
enter the old PIN and press
.
m
•
The battery is full. When the handset is fully charged,
5.
Enter the new PIN and press
.
on the display.
6.
Re-enter the new PIN.
No Caller ID
m
•
Check your subscription with your network operator.
7.
Press
to confirm.
•
The caller may have withheld their number.
How to Obtain Warranty Service or Other Information?
Products Covered
Length of Coverage
To obtain service or information, please call:
US and Canada: 1-888-331-3383
Consumer Products
One (1) year from the date of the products original
Email: [email protected]
purchase by the first consumer purchaser of the
product.
You will receive instructions on how to ship the Products or Accessories at your
expense and risk, to a BINATONE Authorized Repair Center.
Consumer Accessories
Ninety (90) days from the date of the accessories
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof
original purchase by the first consumer purchaser of
of purchase (receipt) which includes the date, place and seller of the Product; (c) if a
the product.
warranty card was included in your box, a completed warranty card showing the serial
Consumer Products and
The balance of the original warranty or for ninety (90)
number of the Product; (d) a written description of the problem; and, most importantly;
days from the date returned to the consumer, whichever
Accessories that are
(e) your address and telephone number.
is longer.
Repaired or Replaced
These terms and conditions constitute the complete warranty agreement between
Exclusions
you and BINATONE. regarding the Products or Accessories purchased by you, and
supersede any prior agreement or representations, including representations made
in any literature publications or promotional materials issued by BINATONE. or
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to
representations made by any agent employee or staff of BINATONE, that may have
normal wear and tear are excluded from coverage.
been made in connection with the said purchase.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated
FCC, ACTA and IC regulations
capacity and batteries that leak are covered by this Warranty.
FCC Part 15
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage,
misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.)
This equipment has been tested and found to comply with the requirements for a Class
to the surface of the product resulting from misuse; (b) contact with liquid, water, rain,
B digital device under Part 15 of the Federal Communications Commission (FCC)
extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c)
rules. These requirements are intended to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and
use of the Products or Accessories for commercial purposes or subjecting the Product
or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault
can radiate
of MOTOROLA or BINATONE., are excluded from coverage.
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
Use of Non-Motorola branded Products and Accessories. Defects or damage that
there is no guarantee that interference will not occur in a particular installation. If this
result from the use of Non-Motorola branded or certified Products or Accessories
equipment does cause harmful interference to radio or television reception, which can
or other peripheral equipment are excluded from coverage. Unauthorized Service
be determined by turning the equipment off and on, the user is encouraged to try to
or Modification. Defects or damages resulting from service, testing, adjustment,
correct the interference by one or more of the following measures:
installation, maintenance, alteration, or modification in any way by someone other
•
Reorient or relocate the receiving antenna.
than MOTOROLA, BINATONE or its authorized service centers, are excluded from
•
Increase the separation between the equipment and receiver.
coverage.
•
Connect the equipment into an outlet on a circuit different from that to which the
Altered Products. Products or Accessories with (a) serial numbers or date tags that
receiver is connected.
have been removed, altered or obliterated; (b) broken seals or that show evidence of
•
Consult the dealer or an experienced radio/TV technician for help.
tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-
Changes or modifications to this equipment not expressly approved by the party
Motorola branded housings, or parts, are excluded from coverage.
responsible for compliance could void the user's authority to operate the equipment.
Communication Services. Defects, damages, or the failure of Products or Accessories
This device complies with Part 15 of the FCC rules. Operation is subject to the
due to any communication service or signal you may subscribe to or use with the
following two conditions: (1) this device may not cause harmful interference, and (2)
Products or Accessories is excluded from coverage.
this device must accept any interference received, including interference that may
m
If the call is from a payphone,
to
Unregister
and press
.
If the call is from a ringback request,
m
.
7.1
Caller ID
If you have subscribed to a Caller ID Service, you will be able to see your caller's
m
d
number on your handset (provided it is not withheld) prior to answering the call. The
or
to select the handset you want to delete and press
.
display can show the first 16 digits or 14 characters of the phone numbers.
is displayed on the handset screen.
If your caller's name and number are stored in the phonebook and a number match is
found, you will see the caller's name on the display as well.
7.2
Calls list
The Calls list stores details of your last 50 received calls, including the phone number,
date and time of call.
The Calls list also alerts you when you have unanswered calls.
m
The caller's details are stored in the Calls list whether or not you have answered the call.
d
, scroll
to
Services
and press
.
The list is shared by all handsets registered to the base. When the list is full, and a new
m
call is received, the oldest entry will be deleted automatically.
to
Reset
and press
.
m
When you have missed call(s) (incoming calls that you haven't answered) the display
is displayed. Press
.
will show
m
X Missed call(s)
and the
Press
to see the callers details.
7.2.1
View the Calls list
HANDSET Redial list
Empty
d
1.
Press
to open the Calls list. If there are no calls in the list, the display shows
ON
PIN code
0000
List
empty.
ON
Dial mode
Tone
ON
Flash mode
Long (600 ms)
•
The most recent number or name if stored in the phonebook is displayed.
1
Keypad lock
OFF
u
d
2.
Press
or
to scroll through the list.
3
Answer machine
On
•
If the call was answered,
1
Answer mode
Record also
b
call was unanswered,
Empty
Ring delay
5
•
If the telephone number is longer than 16 digits, u icon is displayed. Press
Empty
to see the remaining digits.
m
•
Press
m
to access the option to store the entry in your phonebook.
•
Press
twice to see the time and date of the call.
3.
When viewing a calls list number press
different formats, e.g. YYY-YYYY, AAA-YYY-YYYY or 1-AAA-YYY-YYY.
7.2.2
Dial a number in the Calls list
d
1.
Press
to open the Calls list.
t
u
d
2.
Scroll
or
to the entry you want.
Private
will be displayed.
Unknown
will be displayed.
3.
Press
to dial the displayed entry.
Operator
will be displayed.
•
The record cannot be found in your phonebook. Check that you have the correct
name / number stored in your phonebook, with the full area code.
m
**Notation if area code is stored in phone it will not display full number**
d
, scroll
to
Answ. Machine
and press
.
m
I have forgotten my PIN!
to
Voice language
and press
.
m
•
Restore your C101xLX to its default settings, see "6.7 Restore default settings".
d
or
to the required language and press
.
Cannot register a handset to the base
•
You can register up to a maximum of 4 handsets to a C101xLX base. You must
un-register a handset in order to register a new one.
•
Check that you have entered the correct PIN code (default = 0000).
•
Check that you are at least 3 feet away from other electrical equipment to avoid
interference when registering.
Handset does not ring
•
The handset ringer volume may be set to Off.
e
Noise interference on my phone or on other electrical
equipment nearby
.
•
Place your C101xLX at least 3 feet away from electrical appliances or any metal
obstructions to avoid any risk of interference.
Answering machine does not record messages
•
Switch the answering machine on.
•
The memory may be full, delete messages to free space.
•
Answer mode may be set to Answer only.
Change the mode to Record also.
Cannot access messages remotely
•
Remote access may be switched off.
•
If wrong PIN is entered a beep is played. You can enter the PIN once again.
Cannot record outgoing message
•
The memory may be full, delete messages to free space.
Answering machine stops automatically
•
The memory may be full, delete messages to free space.
icon will appear steady
•
The maximum message length is 3 minutes.
cause undesired operation. Privacy of communications may not be ensured when
using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio
frequency energy that can be safely absorbed by a user or bystander according to the
intended usage of the product. This product has been tested and found to comply with
the FCC criteria. Both the Handset may be safely held against the ear of the user. The
telephone base shall be installed and used such that parts of the user's body other than
the hands are maintained at a distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est
susceptible d'en compromettre le fonctionnement.
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical
requirements adopted by the Administrative Council for Terminal Attachments (ACTA).
This Product Complies With 47CFR PART 68.
The plug and jack used to connect this equipment to premises wiring and the
telephone network must comply with applicable Part 68 rules and technical
requirements adopted by ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular
jack that is also compliant. An RJ11 jack should normally be used for connecting to
a single line and an RJ14 jack for two lines. See Installation Instructions in the User's
Guide.
The Ringer Equivalence Number (REN) is used to determine how many devices you
may connect to your telephone line and still have them ring when you are called. The
REN for this product is encoded as the 6th and 7th characters following the US: in the
product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum
of all RENs should be five (5.0) or less. For more information, please contact your local
telephone company.
This equipment may not be used with Party Lines. If you have specially wired alarm
dialing equipment connected to your telephone line, ensure the connection of this
equipment
does not disable your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualified installer.
7.2.3
Copy a Calls list number to the phonebook
Payphone
will be displayed.
Ringback
will be displayed.
d
1.
Press
to open the Calls list.
u
d
2.
Scroll
or
to the entry you want.
m
3.
Press
, the display shows View.
m
d
4.
Scroll
to
Save number
and press
5.
The display shows
Enter
name.
m
6.
Enter the name and press
. The number is displayed.
7.
Edit the number if necessary, then press
7.2.4
Delete an entry
d
1.
Press
to open the Calls list.
u
d
2.
Scroll
or
to the entry you want.
m
3.
Press
, the display shows View.
m
b
d
4.
Scroll
to
Delete
and press
. The display shows Confirm?.
m
icon will flash on all handsets registered to the base.
5.
Press
to confirm or
to cancel.
7.2.5
Delete the entire Calls list
d
1.
Press
to open the Calls list.
m
2.
Press
, the display shows View.
m
b
d
3.
Scroll
to
Delete all
and press
. The display shows Confirm?.
m
4.
Press
to confirm or
to cancel.
8. Using the answering machine
icon is displayed as you scroll to the entry. If the
icon is displayed as you scroll to the entry.
Your C101xLX product can digitally record up to 12 minutes of recorded messages. As
well as recording incoming messages.
You can operate your answering machine from:
•
the base
#
•
the handset
to toggle the Calls List between
•
or remotely, from any touch tone telephone.
You will need to set the correct day and time (if you have not already done so) so each
message is accurately timestamped.
8.1
Switch the answering machine on / off
o
Via the base
1.
Press
on the base to turn the answering machine on or off.
10. General information
If your product is not working properly...
1.
Read this User's Guide.
2.
Visit our website: www.motorola.com
3.
Contact Customer Service in the US and Canada at
1-888-331-3383
Email: [email protected]
Important safety instructions
Follow these safety precautions when using your phone to reduce the risk of fire,
electric shock, and injury to persons or property:
1.
Keep all vents and openings of the phone unblocked.
Do not set the phone on a heating register or over a radiator. Ensure that proper
ventilation is provided at the installation site.
2.
Do not use while wet or while standing in water.
3.
Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
4.
Do not allow anything to rest on the power cord. Place the power cord so that it
will not be walked on.
5.
Never insert objects of any kind into the product vents as that may result in fire or
electric shock.
6.
Unplug this product from the electrical outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7.
Do not disassemble this product. If service or repair work is required, contact the
customer service helpline found in this User's Guide.
8.
Do not overload wall outlets and extension cords.
9.
Avoid using during an electrical storm. Use a surge protector to protect the
equipment.
10. Do not use this phone to report a gas leak, especially if you are in the vicinity of the
gas line.
CAUTION
To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified
Telecommunication Line Cord.
If this equipment is malfunctioning, it must be unplugged from the modular jack until
the problem has been corrected. Repairs to this telephone equipment can only be
made by the manufacturer or its authorized agents. For repair procedures, follow the
instructions outlined under the Limited Warranty.
If this equipment is causing harm to the telephone network, the telephone company
may temporarily discontinue your telephone service. The telephone company is
required to notify you before interrupting service. If advance notice is not practical,
you will be notified as soon as possible. You will be given the opportunity to correct
the problem and the telephone company is required to inform you of your right to file
a complaint with the FCC. Your telephone company may make changes in its facilities,
equipment, operation, or procedures that could affect the proper functioning of this
product. The telephone company is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid
compatible.
If this product has memory dialing locations, you may choose to store emergency
telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test
emergency numbers, please:
•
Remain on the line and briefly explain the reason for the call before hanging up.
•
Perform such activities in off-peak hours, such as early morning or late evening.
Via the handset
m
m
d
1.
Press
, scroll
to
Answ. Machine
and press
.
m
d
2.
Scroll
to
Voice answer
and press
.
u
d
3.
Press
or
to select either
Answer only, Record also
or
Off
.
8.2
Listening to your messages
P
Using the base:
1.
Press
. If you have new messages they will be played.
m
. The number is stored.
2.
If you have no new messages all messages will be played, starting with the oldest
message first.
During playback:
Press s to stop message playback.
>
Press
to play the next message.
<
Press
D
to play the previous message.
Press
to delete the current message.
Using the handset:
1.
When you have new messages, the display shows
m
X new message(s)
icon will flash. Press
to play new messages.
m
u
2.
If you have no new messages, press
m
, scroll
or
press
.
m
3.
Play
is displayed, press
.
4.
The display shows the number of the message being played and the date and time
the message was left will toggle on the screen.
m
5.
During playback press
to display a list of options.
u
d
Use the
or
keys to change the options:
m
•
Repeat
- press
m
to repeat current message
•
Next
- press
to play next message
m
•
Previous
- press
to play previous message
m
e
•
Delete
- press
to delete the current message.
6.
Press
to stop playback and return to standby.
8.3
Adjust the speaker volume
You can adjust the base loudspeaker volume from low to high. Press
-
volume, or
to decrease the volume.
Unplug this cordless phone immediately from an outlet if:
•
The power cord or plug is damaged or frayed.
•
Liquid has been spilled on the product.
•
The product has been exposed to rain or water. Do not retrieve the handset or
base until after you have unplugged the power and phone from the wall. Then
retrieve the unit by the unplugged cords.
•
The product has been dropped or the cabinet has been damaged.
•
The product exhibits a distinct change in performance.
Installation Guidelines
1.
Read all instructions and save them for future reference.
2.
Follow all warnings and instructions marked on the product.
3.
Do not install this product near a bath tub, sink, or shower.
4.
Operate this phone using only the power source that is indicated on the marking
label. If you are unsure of the power supply to your home, consult with your dealer
or local power company.
5.
Do not place this product on an unstable cart, stand, or table. This product may
fall, causing serious damage to the product.
6.
Adjust only those controls that are covered by the operating instructions.
Improper adjustment of other controls may result in damage and will often require
extensive work to restore the product to normal operation.
7.
Clean this product with a soft, damp cloth. Do not use chemicals or cleaning
agents to clean this phone.
8.
Use only the power supply that came with this unit. Using other power supplies
may damage the unit.
9.
Because this phone operates on electricity, you should have at least one phone in
your home that operates without electricity in case of a power outage.
10. To avoid interference to nearby appliances, do not place the base of the phone on
or near a TV, microwave oven, or VCR.
CAUTION
To maintain compliance with the FCC's RF exposure guidelines, place the base unit at
least 8 inches from nearby persons.
Battery Safety Instructions
•
Do not burn, disassemble, mutilate, or puncture the battery. The battery contains
toxic materials that could be released, resulting in injury.
Industry Canada
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference, including
interference
that may cause undesired operation.
The term "IC: " before the certification/registration number only signifies that the
Industry Canada technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.0B. The REN
is an indication of the maximum number of devices allowed to be connected to a
telephone interface. The termination on an interface may consist of any combination
of devices subject only to the requirement that the sum of the RENs of all the devices
does not exceed five.
This equipment meets the applicable Industry Canada Terminal Equipment & Technical
Specifications.
Placing the receiver slightly above the ear may result in better performance for hearing
aids with microphones positioned behind the ear.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands, although the SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the maximum value, in
general, the closer you are to a wireless base station antenna, the lower the power
output. Before a new model phone is a available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the exposure limit established by the
FCC, Tests for each phone are performed in positions and locations (e.g. at the ear)
as required by the FCC. This handset has also been tested and meets the FCC RF
exposure guidelines. Use of other accessories may Non-compliance with the above
restrictions may result in violation of RF exposure guidelines.
8.4
Delete all messages
m
m
u
d
1.
Press
, scroll
or
to
Answ. Machine
and press
.
m
u
d
2.
Scroll
or
to
Delete all
and press
.
m
m
3.
Dispaly shows
Confirm?
press
.
and press
to confirm.
8.5
Outgoing messages (OGMs)
This is the message your callers hear when the answering machine answers the call.
There are two pre-recorded outgoing messages, or you can record your own.
8.5.1
Record also
The pre-set Record also outgoing message, allows your caller to leave a message,
ie: "Hello, your call cannot be taken at the moment, please leave your message after
the tone'.
8.5.2
Answer only
The caller can listen to your announcement but cannot leave a message. The pre-
recorded message is "Hello, your call cannot be taken at the moment, and you cannot
leave a message, so please call later."
8.5.3
Record, play or delete your own outgoing message
m
m
d
1.
Press
, scroll
to
Answ. Machine
and press
.
and the
m
d
2.
Scroll
to
Announcement
and press
.
d
to
Answ. Machine
and
u
d
3.
Press
or
to select either
Answer only
or
Record also
and press
u
d
4.
Scroll
or
to select either Play,
Record
or
Use default
and press
5.
If you select
Play
the current OGM will play back.
m
If you select
Record
once you here the beep speak your message into the
handset, to end recording press
. The message will automatically play back.
m
If you selected
Use default
the display shows Confirm?, press
to confirm.
8.5.4
Select the OGM
m
m
d
1.
Press
, scroll
to
Answ. Machine
and press
.
m
d
2.
Scroll
to
Voice answer
and press
.
m
u
d
3.
Press
or
to select either
Answer only, Record also
and press
NOTE
If the answering machine is turned off and then turned on via the base unit the settings
will be the same as when it was last switched on.
+
to increase the
Consumer Products and Accessories
Limited Warranty ("Warranty")
Thank you for purchasing this Motorola branded product manufactured under license
by Binatone Electronics International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this Motorola
branded product ("Product") or certified accessory ("Accessory") sold for use with this
product that it manufactured to be free from defects in materials and workmanship
under normal consumer usage for the period outlined below. This Warranty is your
exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not transferable.
SAVE THESE INSTRUCTIONS
What will BINATONE do?
BINATONE or its authorized distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or Accessories that
does not
conform to this Warranty. We may use functionally equivalent reconditioned/
refurbished/ pre-owned or new Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE
THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS,
LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING
OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE
PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE
DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential
damages, or limitation on the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This Warranty gives you specific legal rights, and you
may also have other rights that vary from one jurisdiction to another.
Service Center Information
USA:
Encompass Supply Chain Solutions, Inc.
775 Tipton Industrial Dr. Suite D Lawrenceville, GA 30046
Tel no.: 1-800-881-3344
Canada:
Lenbrook Industries Ltd
633 Granite Court, Pickering, ON L1W 3K1
Tel no.: 905-831-6555
m
.
m
.
to confirm.