Motorola D1011 User Manual - Page 6

Browse online or download pdf User Manual for Cordless Telephone Motorola D1011. Motorola D1011 35 pages. Motorola d1010 series digital cordless phone with answer machine
Also for Motorola D1011: User Manual (30 pages)

Print Page

1. Getting started

WARNING

Do not place your D1011 in the bathroom or other humid areas.

Location

You need to place your D1011 base within 2 metres of the mains power

socket and telephone socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical appliances to

avoid interference. Your D1011 works by sending radio signals between

the handset and base. The strength of the signal depends on where you

place the base. Putting it as high as possible ensures the best signal.

HANDSET RANGE

The D1011 has a range of 300 metres outdoors when there is a clear line

of sight between the base and handset. Any obstruction between the

base and handset will reduce the range significantly. With the base

indoors and handset either indoors or outdoors, the range will normally

be up to 50 metres. Thick stone walls can severely affect the range.

SIGNAL STRENGTH

The

icon on your handset indicates when you are in range. When out

of range of the base, the screen shows

If you are on a call, the line will hang up if the handset moves out of range

of the base. Move back within in range. The handset will automatically re-

connect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all times. Do

not connect the telephone line cord into the wall socket until the handset

is fully charged. Only use the power and telephone cables supplied with

the product.

SEARCHING

and the

flashes.

WHICH POWER ADAPTOR?

The power adaptor with a clear connector is for the base unit and the

power adaptor with a red colour connector is for the charger unit.

Connecting up the base

Plug the mains power cable with the clear connector into the socket

marked

on the underside of the base and plug the other end into the

mains power wall socket and switch the power on.

Connecting the handset and charger (Multi-pack only)

If you have purchased a multiple pack, this process will need to be carried

out for all handsets and chargers:

1. Plug the mains power cable with the red connector into the socket

marked

on the underside of the charger.

Getting started