Motorola D502 User Manual - Page 29

Browse online or download pdf User Manual for Cordless Telephone Motorola D502. Motorola D502 39 pages. D5 series
Also for Motorola D502: User Manual (38 pages), Manual (44 pages)

Print Page

On the handset:

1. Press

, scroll

REG BASE

2. Scroll

and press

3. Enter the base number (1 - 4).

The base numbers that are already in use flashes. The

SEARCHING...

display shows

4. When the handset finds the base signal, the display

SEARCHING...X

shows

, where

identification number.

5. The display will ask for the PIN to be entered. Enter the

4 digit PIN code (default = 0000) and press

You will hear a beep if the registration is successful.

The handset is automatically assigned an available

handset number. Use this number when making

internal calls.

NOTE

If registration is not successful the first time, please repeat

the process again in case the base registration period ran

out of time. If the base is not found after a few seconds, the

handset returns to standby. Try registering again.

If there are already 5 handsets registered to the base, the

registration will fail. You must de-register another handset

before you can register a new one.

Using additional handsets

and press

indicates the base

9.2

to your D5 base

IMPORTANT

DECT GAP Profile only guarantees that basic calling

functions will work correctly between different makes/types

of handset and base. There is a possibility that certain

devices such as Caller ID will not work correctly.

On the base:

1. Press and hold the

hear two beeps. The base will remain in registration

mode for 90 seconds.

On the handset:

Follow the registration instructions given in your handset's

user guide.

9.3

Select a base

If your D5 handset is registered to more than one base (e.g.

one at work and one at home), you can select which base to

use.

Each handset can be registered with up to four bases.

1. Press

The display shows

button for 3 seconds until you

, scroll

and press

SELECT BASE