Dimas Dimas WS 460 Operating Instructions Manual - Page 13

Browse online or download pdf Operating Instructions Manual for Saw Dimas Dimas WS 460. Dimas Dimas WS 460 19 pages. Wall saw dimas ws 460

Print Page

Fit The Blade

On the Dimas WS 400 series the blade is fitted in an

entirely new way. Our new quick-attach blade flange

allows the operator to secure the blade to the blade

flange in the traditional way, with the flange mounted

to the saw head, or while it is off the saw head.

1. Start by removing any dirt from the contact surfaces

on the blade flange and blade.

2. Check the blade's direction of rotation. The blade

should rotate counterclockwise as seen from the saw

side.

3. Bolt the quick-attach blade flange, the blade and the

outer blade flange, together.

4. Hang the blade and blade flange assembly on the

cutting arm (blade is not shown in the figure).

5. Carefully rotate the blade until the quick-attach

blade flange seats onto the cutting arm utilize the

power travel feature.

6. Press in the blade spindle into the cutting arm at the

same time as the blade is rotated carefully. When

the blade spindle can no longer be pressed in by

hand it should be tightened using the supplied

18mm wrench until it is properly secured (tightening

torque 30-30Nm or 22 ft lbs - 29.58 ft lbs).

WARNING

Exercise care when assembling the blade so

that it does not become loose when cutting.