Motorola Astro XTL 5000 Instruction Manual - Page 22
Browse online or download pdf Instruction Manual for Radio Motorola Astro XTL 5000. Motorola Astro XTL 5000 38 pages. Dual-radio w3 handheld control head system
Print Page
3-6
3.6
Aux Button Configuration
The final configuration item for the dual-radio system is to program a button on the control head to
switch between the mobile radios. This button is known as the Auxiliary Radio Button. On the W3
control head the Auxiliary Radio Button can be assigned to any of the programmable button
locations in the Radio Configuration->Controls->Control Head screen
25 Mobile CPS. In
Auxiliary Radio Button.
Since there are no button indicators on the W3 control head, the only indication the user will have to
determine which radio is currently being selected is the "Radio Alias ID". The "Radio Alias ID" is
momentarily displayed on the control head after a radio switch occurs. As a result, it is recommend
that Zone names be configured to display a unique value for each radio (ex: "R1" and "R2"). This will
allow the user to quickly determine which radio is selected by checking the Zone name displayed on
control head.
NOTE: Be sure to program the Auxiliary Radio Button to the same programmable button location for
both Conventional and Trunking in both the Primary and Auxiliary radios.
October 27, 2004
Figure
3-6, the Top-Right Button (T3) has been selected as the location of the
Figure 3-6. Aux Button Configuration Screen
Codeplug Configuration: Aux Button Configuration
(Figure
3-6) in the ASTRO
9964416H03-O