Motorola GP series Service Manual - Page 21
Browse online or download pdf Service Manual for Radio Motorola GP series. Motorola GP series 26 pages. Professional radio
Also for Motorola GP series: Service Information (24 pages), Service Information (31 pages), Service Information (43 pages), Service Information (30 pages), User Manual (16 pages), Manual (30 pages)
Print Page
Notes For All Schematics and Circuit Boards
5.0
Notes For All Schematics and Circuit Boards
* Component is frequency sensitive. Refer to the Electrical Parts List for value and usage.
1. Unless otherwise stated, resistances are in Ohms (k = 1000), and capacitances are in picofarads
(pF) or microfarads (µF).
2. DC voltages are measured from point indicated to chassis ground using a Motorola DC
multimeter or equivalent. Transmitter measurements should be made with a 1.2 µF choke in
series with the voltage probe to prevent circuit loading.
3. Interconnect Tie Point Legend:
UNSWB+
SWB+
R5
CLK
Vdda
Vddd
CSX
SYN
DACRX
VSF
VR
6-LAYER CIRCUIT BOARD DETAIL VIEWING
COPPER STEPS IN PROPER LAYER SEQUENCE
=
Unswitch Battery Voltage (7.5V)
=
Switch Battery Voltage (7.5V)
=
Receiver Five Volts
=
Clock
=
Regulated 3.3 Volts (for analog)
=
Regulated 3.3 Volts (for digital)
=
Chip Select Line (not for LVZIF)
=
Synthesizer
=
Digital to Analog Voltage (For Receiver Front End Filter)
=
Voltage Super Filtered (5 volts)
=
Voltage Regulator
SIDE 1
LAYER 1 (L1)
LAYER 2 (L2)
LAYER 3 (L3)
LAYER 4 (L4)
LAYER 5 (L5)
LAYER 6 (L6)
SIDE 2
INNER LAYERS
2-5