Motorola T3 Manual - Page 8

Browse online or download pdf Manual for Radio Motorola T3. Motorola T3 38 pages. User guide
Also for Motorola T3: Quick Start Manual (2 pages), Brochure (2 pages), User Manual (50 pages)

Print Page

4. When the handset is fully charged,

other end of the telephone line cord (make sure that one end is already plugged into

the base) into the telephone wall socket.

Connecting the handset and charger (for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this process for all the

handsets and chargers.

1. Plug the power adaptor into the socket marked

and plug the other end into the mains power wall socket.

2. Remove the battery cover from the back of the handset and insert the 2 x AAA Ni-MH

rechargeable batteries supplied. Please note the '+' and '-' markings inside the battery

compartment and insert in the correct direction.

3. Slide the battery cover back into place.

4. If you are charging the batteries for the first time, place the handset on the charger to

charge for at least 24 hours continuously.

5. When the handset is fully charged,

display will show

to the base.

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH 300mA

rechargeable batteries) supplied with your T3.

Please do not use alkaline or non-rechargeable batteries. It may cause permanent

damage to the product and void the warranty.

BATTERY LOW WARNING

icon flashes on the display and you hear a warning beep every minute during a call,

you will need to recharge the handset before you can use it again.

HANDSET

and handset number (e.g. 2) to indicate that it is registered

icon will appear steady on the display. Plug the

on the underside of the charger

icon will appear steady on the display. The

Getting started