Epson LABELWORKS LW-Z700 User Manual - Page 4

Browse online or download pdf User Manual for Label Maker Epson LABELWORKS LW-Z700. Epson LABELWORKS LW-Z700 4 pages.
Also for Epson LABELWORKS LW-Z700: User Manual (2 pages)

Print Page

Customizing Labels

Setting the Format and Style (Edit menu)

You can decorate your label by setting the following.

MEMO

The setting items displayed when you press

differ depending on the label type you create.

Layout

Left, Center, Justify, Right

Adjusts the layout when multiple lines are used.

Frame & Table

Decorates the text with a frame or inserts a table.

Style

Outline, Normal, Shadow, S+O

Applies a character style to text.

Char. spacing

None, Narrow, Normal, Wide

Sets the inter-character spacing.

Border & Line

Strikeout, Underline, None, Border, Round brdr,

Shading, Brdr mesh, Round mesh

Applies border, underline, shade etc. to text.

Char. Width

Smaller, Small, Narrow, Normal, Wide

This allows you to change the width or height of

characters.

Bold & Italic

Italic, Normal, Bold, B+I

Changes the text in bold or italics.

Length

This setting is the same as when

is pressed.

"Setting the Label Length"

Margins

This setting is the same as when

is pressed.

"Setting the Margins"

Saving Frequently Used Labels

By saving frequently used labels, you will be able to easily recall and print from

them next time.

Up to 100 labels can be saved.

Saving a label

1. Press

2. Select " Save " with

and press

3. Select a registration number with

then press

The registration confirmation screen appears.

4. Confirm the registration number and then press

Recall the saved label

1. Press

2. Select " Recall " with

and press

3. Select a registration number with

then press

The recall confirmation screen appears.

4. Confirm the registration number and then press

Deleting the saved label

1. Press

2. Select " Delete" with

and press

3. Select a registration number with

then press

The deletion confirmation screen appears.

4. Confirm the registration number and then press

Orientation

AB A

Sets the orientation of the text.

AB A

Font size

This setting is the same as when

is pressed.

"Changing the Font Size"

Font

This setting is the same as when

"Changing the Font"

Procedure for setting

1. Place the cursor.

Place the cursor on the left of the characters to

which you want to apply a function.

If you apply the function to a specific line or block,

confirm that the cursor is in the line or block.

2. Press

Example: to apply "Bold & Italic"

3. Select "Bold & Italic" with

4. Select "B + I" with

and press

5. Select an area to which you want to apply the

function with

and press

When "Character" is selected, the function is applied

to all characters on the right of the cursor.

Utilizing Print Functions

Enlarge print

You can create a label that is larger than the width of a single label.

Print the created content separately on multiple labels and then put them

together to use as a single label.

or the number keys and

1. Press

2. Select " Enlarge print " with

3. Select " *2size " with

4. Select " 2/2 " with

5. Select " Start print? " with

Printing starts.

MEMO

The function remains enabled even after printing. To disable the function, select "Off".

or the number keys and

Mirror print

1. Press

2. Select " Mirror print " with

3. Select " On " with

4. Select " Start print? " with

or the number keys and

Printing starts.

MEMO

The function remains enabled even after printing. To disable the function, select "Off".

Print copies

1. Press

2. Select " Print copies " with

3. Enter the number of print copies and then press

4. Select " Start print? " with

Printing starts.

MEMO

The function remains enabled even after printing. To disable the function, set the

number of print copies to "1".

Changing the Font Size

You can change the font size of text or a block line by line. Among

the preset setting items, select one with the same number of

lines as that of the text or block you want to change.

MEMO

You may not be able to change the font size depending on the

label type you create.

1. Press

2. Each time you press

, the font size changes.

Changing the Font

Changes the font type of text.

1. Press

is pressed.

2. Each time you press

SansS.

Roman

Changing the Text Orientation

Changes the text orientation to vertical or horizontal.

MEMO

You may not be able to change the text orientation depending

on the label type you create.

and press

1. Press

Each time you press

between " Horizontal" and "Vertical".

Horizontal

Vertical

When creating "Patch Panel", "Block-66", "Faceplate", or

"Mix-Len"

1. Press

2. Select the orientation with

Hori.

Vert.1

Vert.2

and press

Off

and press

Setting the Label Length

You can set the length of label or block.

MEMO

When creating a special label, you can set the length again.

Setting items for special label is displayed after pressing

1. Press

2. Select the setting method of the length with

Auto: Automatically adjusts the label length depending

Set: Sets the label length.

Setting range: 1 to 99.9 cm

3. Select the alignment for the text with

press

Left, Center, Justify, Right

, the font changes.

Setting the Margins

Sets the left and right margins.

MEMO

You may not be able to set the margins depending on the label

type you create.

1. Press

2. Select the type of margins with

, the setting switches

Adding Block

By dividing text into blocks, you can change the style and the

number of lines block-by-block.

Display

and press

1. Press

A new block is started from the character next to the

cursor.

Changing the Printer Settings

Auto cut

Auto cut:

Sets whether or not to cut automatically.

Half cut:

When "Auto cut" is set to "On", the function "Half cut" for precutting just the

label part to make the backing paper easy to peel off can be set.

Print density

Sets the print density.

Drop stop

This function is useful for affixing consecutively printed labels one at a time.

Select "On" to avoid a printed label from dropping. A printed label stays at the

tape eject slot.

When printing multiple copies, printing of the second or later labels starts each

time you remove a printed label.

This function is only available when the label length is 28 mm or more, "Auto

cut" is set to "On", and "Half cut" is set to "Off".

Backlight

Sets the display backlight to On or Off.

Language

You can select the language shown on the display from the following:

Dansk, Deutsch, English, Español, Français, Italiano, Nederlands, Norsk,

Português-Br, Português-EU, Suomi, Svenska, Türkçe

inch:cm

The unit of length used to indicate the label size can be switched between inch

and cm.

MEMO

Version: To make sure the version number that has been installed in the printer.

Procedure for setting

1. Press

2. Select the desired function with

3. Select the desired item with

and press

on the length of text.

and

and press

Label

Block 1

Block 2

and press